[PATCH V2 1/2] dt-bindings: leds: add Broadcom's BCM63138 controller

[Rob Herring]

On Wed, 24 Nov 2021 12:19:51 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
> 1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
> 2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
> 
> The newer one was also later also used on BCM4908 SoC.
> 
> Old block is already documented in the leds-bcm6328.yaml. This binding
> documents the new one which uses different registers & programming. It's
> first used in BCM63138 thus the binding name.
> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> V2: Rename to bcm63138 & make "brcm,bcm63138-leds" the main compatible
> ---
>  .../bindings/leds/leds-bcm63138.yaml          | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
> 

Reviewed-by: Rob Herring <robh at kernel.org>