[v13 2/2] pwm: Add Aspeed ast2600 PWM support

[Philipp Zabel]

On Mon, 2021-11-29 at 14:43 +0800, Billy Tsai wrote:
[...]
> +	ret = clk_prepare_enable(priv->clk);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Couldn't enable clock\n");
> +
> +	ret = reset_control_deassert(priv->reset);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Couldn't deassert reset control\n");
> +		goto err_disable_clk;
> +	}

Is there any reason to keep the clocks running and the controller out of
reset while the PWM outputs are disabled?

regards
Philipp