[PATCH 1/3] usb: aspeed-vhub: add qualifier descriptor

Neal Liu neal_liu at aspeedtech.com
Fri Nov 26 03:09:52 PST 2021


Support qualifier descriptor to pass USB30CV compliance test.

Signed-off-by: Neal Liu <neal_liu at aspeedtech.com>
---
 drivers/usb/gadget/udc/aspeed-vhub/hub.c  | 29 ++++++++++++++++++++---
 drivers/usb/gadget/udc/aspeed-vhub/vhub.h |  2 ++
 2 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index b9960fdd8a51..d76f83bc7762 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -68,6 +68,18 @@ static const struct usb_device_descriptor ast_vhub_dev_desc = {
 	.bNumConfigurations	= 1,
 };
 
+static const struct usb_qualifier_descriptor ast_vhub_qual_desc = {
+	.bLength = 0xA,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = cpu_to_le16(0x0200),
+	.bDeviceClass = USB_CLASS_HUB,
+	.bDeviceSubClass = 0,
+	.bDeviceProtocol = 0,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 1,
+	.bRESERVED = 0,
+};
+
 /*
  * Configuration descriptor: same comments as above
  * regarding handling USB1 mode.
@@ -271,9 +283,11 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
 		BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
 	case USB_DT_CONFIG:
 		dsize = AST_VHUB_CONF_DESC_SIZE;
 		memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
+		((u8 *)ep->buf)[1] = desc_type;
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
 		BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
@@ -283,6 +297,10 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
 		BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		dsize = sizeof(vhub->vhub_qual_desc);
+		memcpy(ep->buf, &vhub->vhub_qual_desc, dsize);
+		break;
 	default:
 		return std_req_stall;
 	}
@@ -417,10 +435,9 @@ enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
 
 		/* GET/SET_CONFIGURATION */
 	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
-		return ast_vhub_simple_reply(ep, 1);
+		return ast_vhub_simple_reply(ep, vhub->current_config);
 	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
-		if (wValue != 1)
-			return std_req_stall;
+		vhub->current_config = wValue;
 		return std_req_complete;
 
 		/* GET_DESCRIPTOR */
@@ -428,6 +445,8 @@ enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
 		switch (wValue >> 8) {
 		case USB_DT_DEVICE:
 		case USB_DT_CONFIG:
+		case USB_DT_DEVICE_QUALIFIER:
+		case USB_DT_OTHER_SPEED_CONFIG:
 			return ast_vhub_rep_desc(ep, wValue >> 8,
 						 wLength);
 		case USB_DT_STRING:
@@ -1033,6 +1052,10 @@ static int ast_vhub_init_desc(struct ast_vhub *vhub)
 	else
 		ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings);
 
+	/* Initialize vhub Qualifier Descriptor. */
+	memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc,
+		sizeof(vhub->vhub_qual_desc));
+
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 87a5dea12d3c..e6a11a22422a 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -419,12 +419,14 @@ struct ast_vhub {
 
 	/* Upstream bus speed captured at bus reset */
 	unsigned int			speed;
+	u8				current_config;
 
 	/* Standard USB Descriptors of the vhub. */
 	struct usb_device_descriptor	vhub_dev_desc;
 	struct ast_vhub_full_cdesc	vhub_conf_desc;
 	struct usb_hub_descriptor	vhub_hub_desc;
 	struct list_head		vhub_str_desc;
+	struct usb_qualifier_descriptor	vhub_qual_desc;
 };
 
 /* Standard request handlers result codes */
-- 
2.25.1




More information about the linux-arm-kernel mailing list