[PATCH 08/12] arm64: dts: rockchip: rk356x: Add VOP2 nodes

Heiko Stübner heiko at sntech.de
Fri Nov 26 00:15:44 PST 2021


Am Freitag, 26. November 2021, 08:40:21 CET schrieb Sascha Hauer:
> On Thu, Nov 25, 2021 at 09:25:28PM +0100, Johan Jonker wrote:
> > Hi Sascha,
> > 
> > 
> > On 11/17/21 3:33 PM, Sascha Hauer wrote:
> > > The VOP2 is the display output controller on the RK3568. Add the node
> > > for it to the dtsi file along with the required display-subsystem node
> > > and the iommu node.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > ---
> > >  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 52 ++++++++++++++++++++++++
> > >  1 file changed, 52 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > > index 46d9552f60284..6ebf7c14e096a 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > > @@ -447,6 +447,58 @@ gmac1_mtl_tx_setup: tx-queues-config {
> > >  		};
> > >  	};
> > >  
> > 
> > > +	display_subsystem: display-subsystem {
> > > +		compatible = "rockchip,display-subsystem";
> > > +		ports = <&vop_out>;
> > > +	};
> > 
> > Some DT sort rules:
> > 
> > For nodes:
> > Sort things without reg alphabetical first,
> > then sort the rest by reg address.
> > 
> > > +
> > > +	vop: vop at fe040000 {
> > 
> > > +		compatible = "rockchip,rk3568-vop";
> > 
> > From rockchip-vop2.yaml:
> > +properties:
> > +  compatible:
> > +    enum:
> > 
> > +      - rockchip,rk3568-vop
> > +      - rockchip,rk3566-vop
> > 
> > Maybe sort yaml compatibles in alphabetical order.
> > 
> > rockchip,rk3566-vop is not used in the dtsi I think.
> > 
> > Comment by Andy Yan:
> > > 
> > > But take care that the vop on rk3566 has a special limitation: there are 
> > > three
> > > 
> > > windows(Cluster1/Esmart1/Smart1) that have a mirror lock, that means they
> > > 
> > > can't be programed framebuffer address independently , they can only
> > > 
> > > share framebuffer address with Cluster0/Esmart0/Smart0.
> > 
> > Question:
> > Given Andy's comment could someone explain weather the vop and hdmi
> > nodes should be in rk3566.dtsi and rk3568.dtsi with an extra
> > rockchip,rk3566-dw-hdmi compatible?
> 
> We could put the vop/hdmi nodes into rk356x.dtsi and just add the
> compatible properties to rk3566.dtsi and rk3568.dtsi.

sounds about right. We have similar solutions in place in other socs.

Heiko






More information about the linux-arm-kernel mailing list