[PATCH 03/15] PCI: mvebu: Check that PCI bridge specified in DT has function number zero

[Pali Rohár]

Driver cannot handle PCI bridges at non-zero function address. So add
appropriate check. Currently all in-tree kernel DTS files set PCI bridge
function to zero.

Signed-off-by: Pali Rohár <pali at kernel.org>
Cc: stable at vger.kernel.org
---
 drivers/pci/controller/pci-mvebu.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 6197f7e7c317..08274132cdfb 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -864,6 +864,11 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	port->devfn = of_pci_get_devfn(child);
 	if (port->devfn < 0)
 		goto skip;
+	if (PCI_FUNC(port->devfn) != 0) {
+		dev_err(dev, "%s: invalid function number, must be zero\n",
+			port->name);
+		goto skip;
+	}
 
 	ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
 				 &port->mem_target, &port->mem_attr);
-- 
2.20.1