[PATCH v4 03/12] ARM: dts: Add basic support for Airoha EN7523

[Felix Fietkau]

From: John Crispin <john at phrozen.org>

Add basic support for Airoha EN7523, enough for booting to console.

The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.

Signed-off-by: John Crispin <john at phrozen.org>
Signed-off-by: Bert Vermeulen <bert at biot.com>
---
 arch/arm/boot/dts/Makefile       |   2 +
 arch/arm/boot/dts/en7523-evb.dts |  27 ++++++++
 arch/arm/boot/dts/en7523.dtsi    | 114 +++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..81cb49f8d6fd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..e8e5c034cee7
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..de9e5f3ff155
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary at 84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag at 84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt at 85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr at 86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc at 86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller at 9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>, <0x09080000 0x80000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		clock-frequency = <25000000>;
+	};
+
+	uart1: serial at 1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+};
-- 
2.30.1