[PATCH v3 3/3] PCI: apple: Fix #PERST polarity

[Marc Zyngier]

On Tue, 23 Nov 2021 21:36:11 +0000,
Luca Ceresoli <luca at lucaceresoli.net> wrote:
> 
> Hi Mark,
> 
> On 23/11/21 19:06, Marc Zyngier wrote:
> > Now that #PERST is properly defined as active-low in the device tree,
> > fix the driver to correctly drive the line indemendently of the
> > implied polarity.
> > 
> > Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
> > Suggested-by: Pali Rohár <pali at kernel.org>
> > Signed-off-by: Marc Zyngier <maz at kernel.org>
> 
> Thanks for quickly addressing this!
> 
> Do we need a transition path for backward compatibility with old DTs
> already around? Something like this [0]. You said [1] the DT actually
> used is not even the one in the kernel, thus how do we guarantee DT and
> driver switch to the new polarity all at once?

No. As it turns out, neither u-boot nor OpenBSD (the only two other
payloads that can boot on M1) are upstreamed yet. So we're still in
that stage where we don't need to maintain backward compatibility. If
we don't get this patches merged by the end of this cycle, we will
have to revisit this though.

> 
> [0] https://lkml.org/lkml/2021/6/24/1049
> [1] https://lkml.org/lkml/2021/11/23/455
> 
> > ---
> >  drivers/pci/controller/pcie-apple.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> > index 957960a733c4..03bc56f39be5 100644
> > --- a/drivers/pci/controller/pcie-apple.c
> > +++ b/drivers/pci/controller/pcie-apple.c
> > @@ -540,7 +540,7 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
> >  	rmw_set(PORT_APPCLK_EN, port->base + PORT_APPCLK);
> >  
> >  	/* Engage #PERST before setting up the clock */
> >
> > -	gpiod_set_value(reset, 0);
> > +	gpiod_set_value(reset, 1);
> >  
> >  	ret = apple_pcie_setup_refclk(pcie, port);
> >  	if (ret < 0)
> > @@ -551,7 +551,7 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
> >  
> >  	/* Deassert #PERST */
> >  	rmw_set(PORT_PERST_OFF, port->base + PORT_PERST);
> > -	gpiod_set_value(reset, 1);
> > +	gpiod_set_value(reset, 0);
> 
> Minor note: if it were me I would coalesce patches 1 and 3 together,
> otherwise we are insisting on a wrong implementation (patch 1) to later
> fix it all (this patch).

The first patch is a clear bug fix that has a direct HW impact. The
second patch is only sugar coating with zero material impact
(absolutely nothing changes in the way the HW is driven). Squashing
these two patches would be absolutely the wrong thing to do.

	M.

-- 
Without deviation from the norm, progress is not possible.