[PATCH v4 4/4] arm64: dts: apple: t8103: Add cd321x nodes

[Janne Grunau]

All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two addiotional cd321x controllers.

Signed-off-by: Janne Grunau <j at jannau.net>
Reviewed-by: Sven Peter <sven at svenpeter.dev>
---
 - fixed typo in commit message
 - renamed cd321x nodes to "usb-pd"
 - added Reviewed-by tag

 arch/arm64/boot/dts/apple/t8103-j456.dts  | 18 ++++++++++++++++++
 arch/arm64/boot/dts/apple/t8103-jxxx.dtsi | 18 ++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 7267e069355b..884fddf7d363 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -21,6 +21,24 @@ aliases {
 	};
 };
 
+&i2c0 {
+	hpm2: usb-pd at 3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd at 3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 53d22b434d76..876278fe0afe 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -39,6 +39,24 @@ &serial0 {
 	status = "okay";
 };
 
+&i2c0 {
+	hpm0: usb-pd at 38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd at 3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
-- 
2.34.0