[PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

The new binding covers a single reg and uses syscon to reference shared
register.

References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index e1cffef4935a..588e57db6859 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -148,15 +148,6 @@ periph_clk: periph_clk {
 		};
 	};
 
-	usb2_phy: usb2-phy at 1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
 	axi at 18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -448,7 +439,16 @@ genpll: clock-controller at 140 {
 						     "sata1", "sata2";
 			};
 
-			syscon at 180 {
+			usb2_phy: phy at 164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon at 180 {
 				compatible = "brcm,cru-clkset", "syscon";
 				reg = <0x180 0x4>;
 			};
-- 
2.31.1