[PATCH v5 3/7] drm: sun4i: dsi: Convert to bridge driver
Maxime Ripard
maxime at cerno.tech
Mon Nov 22 02:07:12 PST 2021
On Mon, Nov 22, 2021 at 12:22:19PM +0530, Jagan Teki wrote:
> Some display panels would come up with a non-DSI output, those
> can have an option to connect the DSI host by means of interface
> bridge converter.
>
> This DSI to non-DSI interface bridge converter would requires
> DSI Host to handle drm bridge functionalities in order to DSI
> Host to Interface bridge.
In order to do this you would need to use the DRM bridge API...
> This patch convert the existing to a drm bridge driver with a
> built-in encoder support for compatibility with existing
> component drivers.
... but changing the encoder driver to a bridge is completely
unnecessary to do so. Why did you need to make that change?
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>
> ---
> Changes for v5:
> - add atomic APIs
> - find host and device variant DSI devices.
> Changes for v4, v3:
> - none
>
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 112 ++++++++++++++++++++-----
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 7 ++
> 2 files changed, 96 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 43d9c9e5198d..a6a272b55f77 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -21,6 +21,7 @@
>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> #include <drm/drm_panel.h>
> #include <drm/drm_print.h>
> #include <drm/drm_probe_helper.h>
> @@ -713,10 +714,11 @@ static int sun6i_dsi_start(struct sun6i_dsi *dsi,
> return 0;
> }
>
> -static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
> +static void sun6i_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_bridge_state)
> {
> - struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> - struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
> + struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
> + struct drm_display_mode *mode = &bridge->encoder->crtc->state->adjusted_mode;
> struct mipi_dsi_device *device = dsi->device;
> union phy_configure_opts opts = { };
> struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
> @@ -772,6 +774,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
> if (dsi->panel)
> drm_panel_prepare(dsi->panel);
>
> + if (dsi->next_bridge)
> + dsi->next_bridge->funcs->atomic_pre_enable(dsi->next_bridge, old_bridge_state);
> +
Please use the proper helpers.
> /*
> * FIXME: This should be moved after the switch to HS mode.
> *
> @@ -787,6 +792,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
> if (dsi->panel)
> drm_panel_enable(dsi->panel);
>
> + if (dsi->next_bridge)
> + dsi->next_bridge->funcs->atomic_enable(dsi->next_bridge, old_bridge_state);
> +
Ditto
> sun6i_dsi_start(dsi, DSI_START_HSC);
>
> udelay(1000);
> @@ -794,15 +802,19 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
> sun6i_dsi_start(dsi, DSI_START_HSD);
> }
>
> -static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
> +static void sun6i_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_bridge_state)
> {
> - struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
> + struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
>
> DRM_DEBUG_DRIVER("Disabling DSI output\n");
>
> if (dsi->panel) {
> drm_panel_disable(dsi->panel);
> drm_panel_unprepare(dsi->panel);
> + } else if (dsi->next_bridge) {
> + dsi->next_bridge->funcs->atomic_disable(dsi->next_bridge, old_bridge_state);
> + dsi->next_bridge->funcs->atomic_post_disable(dsi->next_bridge, old_bridge_state);
Ditto
> }
>
> phy_power_off(dsi->dphy);
> @@ -842,9 +854,25 @@ static const struct drm_connector_funcs sun6i_dsi_connector_funcs = {
> .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> };
>
> -static const struct drm_encoder_helper_funcs sun6i_dsi_enc_helper_funcs = {
> - .disable = sun6i_dsi_encoder_disable,
> - .enable = sun6i_dsi_encoder_enable,
> +static int sun6i_dsi_bridge_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
> +
> + if (dsi->next_bridge)
> + return drm_bridge_attach(bridge->encoder, dsi->next_bridge,
> + NULL, 0);
> +
> + return 0;
> +}
> +
> +static const struct drm_bridge_funcs sun6i_dsi_bridge_funcs = {
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> + .atomic_enable = sun6i_dsi_bridge_atomic_enable,
> + .atomic_disable = sun6i_dsi_bridge_atomic_disable,
> + .attach = sun6i_dsi_bridge_attach,
> };
>
> static u32 sun6i_dsi_dcs_build_pkt_hdr(struct sun6i_dsi *dsi,
> @@ -966,8 +994,6 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
> struct sun6i_dsi *dsi = dev_get_drvdata(dev);
> int ret;
>
> - drm_encoder_helper_add(&dsi->encoder,
> - &sun6i_dsi_enc_helper_funcs);
> ret = drm_simple_encoder_init(drm, &dsi->encoder,
> DRM_MODE_ENCODER_DSI);
> if (ret) {
> @@ -976,18 +1002,26 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
> }
> dsi->encoder.possible_crtcs = BIT(0);
>
> - drm_connector_helper_add(&dsi->connector,
> - &sun6i_dsi_connector_helper_funcs);
> - ret = drm_connector_init(drm, &dsi->connector,
> - &sun6i_dsi_connector_funcs,
> - DRM_MODE_CONNECTOR_DSI);
> + ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
> if (ret) {
> - dev_err(dsi->dev,
> - "Couldn't initialise the DSI connector\n");
> + dev_err(dsi->dev, "Couldn't attach drm bridge\n");
> goto err_cleanup_connector;
> }
>
> - drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
> + if (dsi->panel) {
> + drm_connector_helper_add(&dsi->connector,
> + &sun6i_dsi_connector_helper_funcs);
> + ret = drm_connector_init(drm, &dsi->connector,
> + &sun6i_dsi_connector_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (ret) {
> + dev_err(dsi->dev,
> + "Couldn't initialise the DSI connector\n");
> + goto err_cleanup_connector;
> + }
> +
> + drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
> + }
>
> return 0;
>
> @@ -1013,16 +1047,46 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
> struct mipi_dsi_device *device)
> {
> struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
> - struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
> + struct device_node *remote = device->dev.of_node;
> int ret;
>
> - if (IS_ERR(panel))
> - return PTR_ERR(panel);
> + if (!of_device_is_available(remote)) {
> + /**
> + * I2C interfaced DSI bridges will register DSI host on the
> + * bridge drivers instead of conventional device.
> + *
> + * Those are probed via host of_node instead of device of_node.
> + */
I have no idea what you mean here. Can you expand on what issue you've
tried to solve here?
> + remote = of_graph_get_remote_node(host->dev->of_node, 0, 0);
> + if (!remote)
> + return -ENODEV;
> + }
> +
> + dsi->panel = of_drm_find_panel(remote);
> + if (IS_ERR(dsi->panel)) {
> + dsi->panel = NULL;
> +
> + dsi->next_bridge = of_drm_find_bridge(remote);
> + if (IS_ERR(dsi->next_bridge)) {
> + dev_err(dsi->dev, "failed to find bridge\n");
> + return PTR_ERR(dsi->next_bridge);
> + }
> + } else {
> + dsi->next_bridge = NULL;
> + }
> +
> + of_node_put(remote);
Using devm_drm_of_get_bridge would greatly simplify the driver
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20211122/b72907bb/attachment.sig>
More information about the linux-arm-kernel
mailing list