[PATCH v8 12/12] media: hantro: Support NV12 on the G2 core
Andrzej Pietrasiewicz
andrzej.p at collabora.com
Tue Nov 16 06:38:42 PST 2021
The G2 decoder block produces NV12 4x4 tiled format (NV12_4L4).
Enable the G2 post-processor block, in order to produce regular NV12.
The logic in hantro_postproc.c is leveraged to take care of allocating
the extra buffers and configure the post-processor, which is
significantly simpler than the one on the G1.
Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p at collabora.com>
---
.../staging/media/hantro/hantro_g2_vp9_dec.c | 6 ++--
drivers/staging/media/hantro/hantro_hw.h | 1 +
.../staging/media/hantro/hantro_postproc.c | 31 +++++++++++++++++++
drivers/staging/media/hantro/imx8m_vpu_hw.c | 11 +++++++
4 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
index fc55b03a8004..e04242d10fa2 100644
--- a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
@@ -152,7 +152,7 @@ static void config_output(struct hantro_ctx *ctx,
hantro_reg_write(ctx->dev, &g2_out_dis, 0);
hantro_reg_write(ctx->dev, &g2_output_format, 0);
- luma_addr = vb2_dma_contig_plane_dma_addr(&dst->base.vb.vb2_buf, 0);
+ luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
@@ -191,7 +191,7 @@ static void config_ref(struct hantro_ctx *ctx,
hantro_reg_write(ctx->dev, &ref_reg->hor_scale, (refw << 14) / dst->vp9.width);
hantro_reg_write(ctx->dev, &ref_reg->ver_scale, (refh << 14) / dst->vp9.height);
- luma_addr = vb2_dma_contig_plane_dma_addr(&buf->base.vb.vb2_buf, 0);
+ luma_addr = hantro_get_dec_buf_addr(ctx, &buf->base.vb.vb2_buf);
hantro_write_addr(ctx->dev, ref_reg->y_base, luma_addr);
chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
@@ -236,7 +236,7 @@ static void config_ref_registers(struct hantro_ctx *ctx,
config_ref(ctx, dst, &ref_regs[1], dec_params, dec_params->golden_frame_ts);
config_ref(ctx, dst, &ref_regs[2], dec_params, dec_params->alt_frame_ts);
- mv_addr = vb2_dma_contig_plane_dma_addr(&mv_ref->base.vb.vb2_buf, 0) +
+ mv_addr = hantro_get_dec_buf_addr(ctx, &mv_ref->base.vb.vb2_buf) +
mv_offset(ctx, dec_params);
hantro_write_addr(ctx->dev, G2_REF_MV_ADDR(0), mv_addr);
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index fe5b51046d33..dbe51303724b 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -310,6 +310,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
extern const struct hantro_variant sama5d4_vdec_variant;
extern const struct hantro_postproc_ops hantro_g1_postproc_ops;
+extern const struct hantro_postproc_ops hantro_g2_postproc_ops;
extern const u32 hantro_vp8_dec_mc_filter[8][6];
diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/staging/media/hantro/hantro_postproc.c
index 89de43021779..a7774ad4c445 100644
--- a/drivers/staging/media/hantro/hantro_postproc.c
+++ b/drivers/staging/media/hantro/hantro_postproc.c
@@ -11,6 +11,7 @@
#include "hantro.h"
#include "hantro_hw.h"
#include "hantro_g1_regs.h"
+#include "hantro_g2_regs.h"
#define HANTRO_PP_REG_WRITE(vpu, reg_name, val) \
{ \
@@ -99,6 +100,21 @@ static void hantro_postproc_g1_enable(struct hantro_ctx *ctx)
HANTRO_PP_REG_WRITE(vpu, display_width, ctx->dst_fmt.width);
}
+static void hantro_postproc_g2_enable(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+ struct vb2_v4l2_buffer *dst_buf;
+ size_t chroma_offset = ctx->dst_fmt.width * ctx->dst_fmt.height;
+ dma_addr_t dst_dma;
+
+ dst_buf = hantro_get_dst_buf(ctx);
+ dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+
+ hantro_write_addr(vpu, G2_RS_OUT_LUMA_ADDR, dst_dma);
+ hantro_write_addr(vpu, G2_RS_OUT_CHROMA_ADDR, dst_dma + chroma_offset);
+ hantro_reg_write(vpu, &g2_out_rs_e, 1);
+}
+
void hantro_postproc_free(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
@@ -127,6 +143,9 @@ int hantro_postproc_alloc(struct hantro_ctx *ctx)
if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
buf_size += hantro_h264_mv_size(ctx->dst_fmt.width,
ctx->dst_fmt.height);
+ else if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_VP9_FRAME)
+ buf_size += hantro_vp9_mv_size(ctx->dst_fmt.width,
+ ctx->dst_fmt.height);
for (i = 0; i < num_buffers; ++i) {
struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
@@ -152,6 +171,13 @@ static void hantro_postproc_g1_disable(struct hantro_ctx *ctx)
HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0);
}
+static void hantro_postproc_g2_disable(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+
+ hantro_reg_write(vpu, &g2_out_rs_e, 0);
+}
+
void hantro_postproc_disable(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
@@ -172,3 +198,8 @@ const struct hantro_postproc_ops hantro_g1_postproc_ops = {
.enable = hantro_postproc_g1_enable,
.disable = hantro_postproc_g1_disable,
};
+
+const struct hantro_postproc_ops hantro_g2_postproc_ops = {
+ .enable = hantro_postproc_g2_enable,
+ .disable = hantro_postproc_g2_disable,
+};
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index 455a107ffb02..1a43f6fceef9 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -132,6 +132,14 @@ static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
},
};
+static const struct hantro_fmt imx8m_vpu_g2_postproc_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .codec_mode = HANTRO_MODE_NONE,
+ .postprocessed = true,
+ },
+};
+
static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
{
.fourcc = V4L2_PIX_FMT_NV12_4L4,
@@ -301,6 +309,9 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
.dec_offset = 0x0,
.dec_fmts = imx8m_vpu_g2_dec_fmts,
.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
+ .postproc_fmts = imx8m_vpu_g2_postproc_fmts,
+ .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_g2_postproc_fmts),
+ .postproc_ops = &hantro_g2_postproc_ops,
.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
.codec_ops = imx8mq_vpu_g2_codec_ops,
.init = imx8mq_vpu_hw_init,
--
2.25.1
More information about the linux-arm-kernel
mailing list