[PATCH 4/5] arm64: dts: HiSilicon: Add usb mux hub for HiKey 970

[Mauro Carvalho Chehab]

Add dt bindings for HiKey 970 USB HUB. Such board comes with an
integrated USB HUB provided via a TI TUSB8041 4-port USB 3.0 hub.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
---

To mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/5] at: https://lore.kernel.org/all/cover.1637063775.git.mchehab+huawei@kernel.org/

 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 60594db07041..95ca49f1e455 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -53,6 +53,29 @@ wlan_en: wlan-en-1-8v {
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	usb-hub {
+		compatible = "hisilicon,usbhub";
+		typec-vbus-gpios = <&gpio26 1 0>;
+		otg-switch-gpios = <&gpio4 2 0>;
+		hub-reset-en-gpios = <&gpio0 3 0>;
+		hub-vdd-supply = <&ldo17>;
+		usb-role-switch;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep0: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+			hikey_usb_ep1: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&rt1711h_ep>;
+			};
+		};
+	};
 };
 
 /*
-- 
2.33.1