[PATCH net-next 1/3] net: sparx5: populate supported_interfaces member

[Russell King (Oracle)]

Populate the phy_interface_t bitmap for the Microchip Sparx5 driver
with interfaces modes supported by the MAC.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 .../ethernet/microchip/sparx5/sparx5_main.c   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 4625d4fb4cde..3cb6c1fe43ff 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -293,6 +293,30 @@ static int sparx5_create_port(struct sparx5 *sparx5,
 	spx5_port->phylink_config.type = PHYLINK_NETDEV;
 	spx5_port->phylink_config.pcs_poll = true;
 
+	__set_bit(PHY_INTERFACE_MODE_SGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_QSGMII,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+		  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_5000 ||
+	    spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_5GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_10000 ||
+	    spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
+	if (spx5_port->conf.bandwidth == SPEED_25000)
+		__set_bit(PHY_INTERFACE_MODE_25GBASER,
+			  spx5_port->phylink_config.supported_interfaces);
+
 	phylink = phylink_create(&spx5_port->phylink_config,
 				 of_fwnode_handle(config->node),
 				 config->conf.phy_mode,
-- 
2.30.2