[PATCH net-next 1/3] net: axienet: populate supported_interfaces member

[Russell King (Oracle)]

Populate the phy_interface_t bitmap for the Xilinx axienet driver with
interfaces modes supported by the MAC.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9b068b81ae09..8a0a43d71b51 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2105,6 +2105,14 @@ static int axienet_probe(struct platform_device *pdev)
 	lp->phylink_config.dev = &ndev->dev;
 	lp->phylink_config.type = PHYLINK_NETDEV;
 
+	__set_bit(lp->phy_mode, lp->phylink_config.supported_interfaces);
+	if (lp->switch_x_sgmii) {
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  lp->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  lp->phylink_config.supported_interfaces);
+	}
+
 	lp->phylink = phylink_create(&lp->phylink_config, pdev->dev.fwnode,
 				     lp->phy_mode,
 				     &axienet_phylink_ops);
-- 
2.30.2