[PATCH] Reset task stack state in bringup_cpu()

Mark Rutland mark.rutland at arm.com
Mon Nov 15 03:33:10 PST 2021


To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks are in use the
task's SCS SP is left pointing at an arbitrary point within the task's
shadow call stack.

When an offlines CPU is hotlpugged back into the kernel, this stale
state can adversely affect the newly onlined CPU. Stale KASAN shadow can
alias new stackframes and result in bogus KASAN warnings. A stale SCS SP
is effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the task's entire
shadow call stack can become unusable.

We previously fixed the KASAN issue in commit:

  e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug")

In commit:

  f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")

... we broke both KASAN and SCS, with SCS being fixed up in commit:

  63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit")

... but as this runs in the context of the idle task being offlines it's
potentially fragile.

Fix both of these consistently and more robustly by resetting the SCS SP
and KASAN shadow immediately before we online a CPU. This ensures the
idle task always has a consistent state, and removes the need to do so
when initializing an idle task or when unplugging an idle task.

I've tested this with both GCC and clang, with reelvant options enabled,
offlining and online CPUs with:

| while true; do
|   for C in /sys/devices/system/cpu/cpu*/online; do
|     echo 0 > $C;
|     echo 1 > $C;
|   done
| done

Link: https://lore.kernel.org/lkml/20211012083521.973587-1-woodylin@google.com/
Link: https://lore.kernel.org/linux-arm-kernel/YY9ECKyPtDbD9q8q@qian-HP-Z2-SFF-G5-Workstation/
Fixes: 1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Qian Cai <quic_qiancai at quicinc.com>
Signed-off-by: Mark Rutland <mark.rutland at arm.com>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Dmitry Vyukov <dvyukov at google.com>
Cc: Peter Zijlstra <peterz at infradead.org>
Cc: Valentin Schneider <valentin.schneider at arm.com>
Cc: Will Deacon <will at kernel.org>
Cc: Woody Lin <woodylin at google.com>
---
 kernel/cpu.c        | 7 +++++++
 kernel/sched/core.c | 4 ----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index 192e43a87407..407a2568f35e 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -31,6 +31,7 @@
 #include <linux/smpboot.h>
 #include <linux/relay.h>
 #include <linux/slab.h>
+#include <linux/scs.h>
 #include <linux/percpu-rwsem.h>
 #include <linux/cpuset.h>
 
@@ -588,6 +589,12 @@ static int bringup_cpu(unsigned int cpu)
 	int ret;
 
 	/*
+	 * Reset stale stack state from the last time this CPU was online.
+	 */
+	scs_task_reset(idle);
+	kasan_unpoison_task_stack(idle);
+
+	/*
 	 * Some architectures have to walk the irq descriptors to
 	 * setup the vector space for the cpu which comes online.
 	 * Prevent irq alloc/free across the bringup.
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 3c9b0fda64ac..76f9deeaa942 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -8619,9 +8619,6 @@ void __init init_idle(struct task_struct *idle, int cpu)
 	idle->flags |= PF_IDLE | PF_KTHREAD | PF_NO_SETAFFINITY;
 	kthread_set_per_cpu(idle, cpu);
 
-	scs_task_reset(idle);
-	kasan_unpoison_task_stack(idle);
-
 #ifdef CONFIG_SMP
 	/*
 	 * It's possible that init_idle() gets called multiple times on a task,
@@ -8777,7 +8774,6 @@ void idle_task_exit(void)
 		finish_arch_post_lock_switch();
 	}
 
-	scs_task_reset(current);
 	/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
 }
 
-- 
2.11.0




More information about the linux-arm-kernel mailing list