[PATCH v2 1/3] arm64: dts: amlogic: meson-g12: Fix thermal-zones indent

[Neil Armstrong]

On 26/10/2021 20:28, Alexander Stein wrote:
> This node is currently at /soc/thermal-zones, but the later introduced
> bindings in commit 1202a442a31f ("dt-bindings: thermal: Add yaml bindings
> for thermal zones") put this at /thermal-zones.
> Fix dtb_check warning by moving the thermal-zones node to /
> 
> Signed-off-by: Alexander Stein <alexander.stein at mailbox.org>
> ---
> Changes in v2:
> * Separated from DT bindings patch in v1 (PATCH 1/4)
> * Dropped the Fixes tag
> 
>  .../boot/dts/amlogic/meson-g12-common.dtsi    | 110 +++++++++---------
>  1 file changed, 55 insertions(+), 55 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 00c6f53290d4..ff987e7ccff2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -159,61 +159,6 @@ &clkc CLKID_PCIE_COMB
>  			status = "disabled";
>  		};
>  
> -		thermal-zones {
> -			cpu_thermal: cpu-thermal {
> -				polling-delay = <1000>;
> -				polling-delay-passive = <100>;
> -				thermal-sensors = <&cpu_temp>;
> -
> -				trips {
> -					cpu_passive: cpu-passive {
> -						temperature = <85000>; /* millicelsius */
> -						hysteresis = <2000>; /* millicelsius */
> -						type = "passive";
> -					};
> -
> -					cpu_hot: cpu-hot {
> -						temperature = <95000>; /* millicelsius */
> -						hysteresis = <2000>; /* millicelsius */
> -						type = "hot";
> -					};
> -
> -					cpu_critical: cpu-critical {
> -						temperature = <110000>; /* millicelsius */
> -						hysteresis = <2000>; /* millicelsius */
> -						type = "critical";
> -					};
> -				};
> -			};
> -
> -			ddr_thermal: ddr-thermal {
> -				polling-delay = <1000>;
> -				polling-delay-passive = <100>;
> -				thermal-sensors = <&ddr_temp>;
> -
> -				trips {
> -					ddr_passive: ddr-passive {
> -						temperature = <85000>; /* millicelsius */
> -						hysteresis = <2000>; /* millicelsius */
> -						type = "passive";
> -					};
> -
> -					ddr_critical: ddr-critical {
> -						temperature = <110000>; /* millicelsius */
> -						hysteresis = <2000>; /* millicelsius */
> -						type = "critical";
> -					};
> -				};
> -
> -				cooling-maps {
> -					map {
> -						trip = <&ddr_passive>;
> -						cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> -					};
> -				};
> -			};
> -		};
> -
>  		ethmac: ethernet at ff3f0000 {
>  			compatible = "amlogic,meson-g12a-dwmac",
>  				     "snps,dwmac-3.70a",
> @@ -2415,6 +2360,61 @@ mali: gpu at ffe40000 {
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal: cpu-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <100>;
> +			thermal-sensors = <&cpu_temp>;
> +
> +			trips {
> +				cpu_passive: cpu-passive {
> +					temperature = <85000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "passive";
> +				};
> +
> +				cpu_hot: cpu-hot {
> +					temperature = <95000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "hot";
> +				};
> +
> +				cpu_critical: cpu-critical {
> +					temperature = <110000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ddr_thermal: ddr-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <100>;
> +			thermal-sensors = <&ddr_temp>;
> +
> +			trips {
> +				ddr_passive: ddr-passive {
> +					temperature = <85000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "passive";
> +				};
> +
> +				ddr_critical: ddr-critical {
> +					temperature = <110000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map {
> +					trip = <&ddr_passive>;
> +					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv8-timer";
>  		interrupts = <GIC_PPI 13
> 


Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>