[PATCH v9 04/15] iommu/mediatek: Add probe_defer for smi-larb

Yong Wu yong.wu at mediatek.com
Fri Nov 12 02:54:58 PST 2021


Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
Tested-by: Frank Wunderlich <frank-w at public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 4 ++++
 drivers/iommu/mtk_iommu_v1.c | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 8f566d2e72e5..0033c0634e5e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -848,6 +848,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			of_node_put(larbnode);
 			return -ENODEV;
 		}
+		if (!plarbdev->dev.driver) {
+			of_node_put(larbnode);
+			return -EPROBE_DEFER;
+		}
 		data->larb_imu[id].dev = &plarbdev->dev;
 
 		component_match_add_release(dev, &match, release_of,
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 68bf02f87cfd..4089077256f4 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -606,6 +606,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			of_node_put(larbnode);
 			return -ENODEV;
 		}
+		if (!plarbdev->dev.driver) {
+			of_node_put(larbnode);
+			return -EPROBE_DEFER;
+		}
 		data->larb_imu[i].dev = &plarbdev->dev;
 
 		component_match_add_release(dev, &match, release_of,
-- 
2.18.0




More information about the linux-arm-kernel mailing list