[PATCH v2 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5

[Alistair Francis]

On Sat, Nov 6, 2021 at 12:22 AM Andreas Kemnade <andreas at kemnade.info> wrote:
>
> Hi,
>
> I finally found time to test this.
>
> On Wed,  3 Nov 2021 21:48:28 +1000
> Alistair Francis <alistair at alistair23.me> wrote:
>
> [...]
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        touchscreen at 24 {
> > +            compatible = "cypress,tt2100";
> > +            reg = <0x24>;
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&tp_reset_ds203>;
> > +            interrupt-parent = <&pio>;
> > +            interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
> hmm, in the code is IRQ_TRIGGER_FALLING but here is LEVEL_LOW, hmm what
> it is really?

The reMarkable uses IRQ_TYPE_EDGE_FALLING, but this example isn't
based on that. It' based on the original documentation from the patch
series.

>
> > +            reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
>
> hmm, if the reset gpio at the chip is active low (I guess it is) that
> would indicate an inverter between SoC and gpio. So a nonstandard setup
> as an example, probably not a good idea.

It seems to be common for the cypress,tt2100, as the original
documentation and the rM2 both do this. Does the Kobo not do this?

Alistair

>
> Regards,
> Andreas