[PATCH AUTOSEL 5.4 03/30] ARM: dts: NSP: Fix mpcore, mmc node names

[Sasha Levin]

From: Matthew Hagan <mnhagan88 at gmail.com>

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore at 19000000: $nodename:0: 'mpcore at 19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci at 21000: $nodename:0: 'sdhci at 21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 43ff85d31dc12..5a1352fd90d16 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore at 19000000 {
+	mpcore-bus at 19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -217,7 +217,7 @@
 			#dma-cells = <1>;
 		};
 
-		sdio: sdhci at 21000 {
+		sdio: mmc at 21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.33.0