[PATCH v3 0/5] Refactor thermal pressure update to avoid code duplication

Fri Nov 5 12:51:31 PDT 2021

On 11/5/21 2:18 PM, Thara Gopinath wrote:
>
>
> On 11/5/21 1:33 PM, Steev Klimaszewski wrote:
>> Hi,
>>
>> On 11/5/21 11:26 AM, Lukasz Luba wrote:
>>> Hi Steev,
>>>
>>> On 11/5/21 3:39 PM, Steev Klimaszewski wrote:
>>>> Hi Lukasz,
>>>>
>>> [snip]
> Hi Steve,
>
> Does your system have enough load to hit the boost frequencies ? I 
> don't think this patch should affect hitting boost frequencies as 
> there is no error being returned from topology_update_thermal_pressure.
>
> The warning you are getting is because you have boost frequency 
> enabled and IIUC lmh enabled and thermal pressure framework bails out 
> due to boost_frequency being greater than what is available in per_cpu 
> freq_factor. This is because we do not recalculate freq_factor every 
> time boost is enabled / disabled. IIRC there were some discussions 
> around rebuilding scheduler domains and capacity with user space 
> changes to max frequency but it has never proceeded much. Till that 
> point, I think the right way, is to check whether the new capcity 
> exceeds the max_capacity of the cpu and if yes use max_capacity in 
> lieu of new_capacity to calculate thermal pressure.
>
Hi Thara,

I should definitely be able to push it to 2.96GHz, however I'm simply 
not getting it at all with these patches applied.

So, I'm currently compiling multiple applications - alacritty 
(https://github.com/alacritty/alacritty), and zellij 
(https://github.com/zellij-org/zellij), as well as running pixz on a 
5.1GB file to compress it, and throwing in cpuburn-a53 
(https://github.com/ssvb/cpuburn-arm) and I'm simply not getting 2.96GHz 
at all.  Ever.  I don't normally try to push it that high, but I wanted 
to see if we could ever hit it (the system was also never going above 86C)

analyzing CPU 4:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:54.84%, 902 MHz:0.02%, 979 MHz:0.02%, 1.06 
GHz:0.02%, 1.21 GHz:0.08%, 1.29 GHz:0.07%, 1.36 GHz:0.09%, 1.46 
GHz:0.04%, 1.54 GHz:0.02%, 1.61 GHz:0.02%, 1.69 GHz:0.02%, 1.77 
GHz:0.13%, 1.84 GHz:0.04%, 1.92 GHz:0.04%, 2.00 GHz:0.02%, 2.09 
GHz:0.03%, 2.17 GHz:0.02%, 2.25 GHz:0.02%, 2.32 GHz:0.01%, 2.40 
GHz:0.02%, 2.48 GHz:0.02%, 2.55 GHz:0.02%, 2.65 GHz:0.02%, 2.75 
GHz:0.02%, 2.84 GHz:44.38%, 2.96 GHz:0.00%  (8066)
analyzing CPU 5:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:54.84%, 902 MHz:0.02%, 979 MHz:0.02%, 1.06 
GHz:0.02%, 1.21 GHz:0.08%, 1.29 GHz:0.07%, 1.36 GHz:0.09%, 1.46 
GHz:0.04%, 1.54 GHz:0.02%, 1.61 GHz:0.02%, 1.69 GHz:0.02%, 1.77 
GHz:0.13%, 1.84 GHz:0.04%, 1.92 GHz:0.04%, 2.00 GHz:0.02%, 2.09 
GHz:0.03%, 2.17 GHz:0.02%, 2.25 GHz:0.02%, 2.32 GHz:0.01%, 2.40 
GHz:0.02%, 2.48 GHz:0.02%, 2.55 GHz:0.02%, 2.65 GHz:0.02%, 2.75 
GHz:0.02%, 2.84 GHz:44.38%, 2.96 GHz:0.00%  (8066)
analyzing CPU 6:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:54.84%, 902 MHz:0.02%, 979 MHz:0.02%, 1.06 
GHz:0.02%, 1.21 GHz:0.08%, 1.29 GHz:0.07%, 1.36 GHz:0.09%, 1.46 
GHz:0.04%, 1.54 GHz:0.02%, 1.61 GHz:0.02%, 1.69 GHz:0.02%, 1.77 
GHz:0.13%, 1.84 GHz:0.04%, 1.92 GHz:0.04%, 2.00 GHz:0.02%, 2.09 
GHz:0.03%, 2.17 GHz:0.02%, 2.25 GHz:0.02%, 2.32 GHz:0.01%, 2.40 
GHz:0.02%, 2.48 GHz:0.02%, 2.55 GHz:0.02%, 2.65 GHz:0.02%, 2.75 
GHz:0.02%, 2.84 GHz:44.38%, 2.96 GHz:0.00%  (8066)
analyzing CPU 7:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:54.84%, 902 MHz:0.02%, 979 MHz:0.02%, 1.06 
GHz:0.02%, 1.21 GHz:0.08%, 1.29 GHz:0.07%, 1.36 GHz:0.09%, 1.46 
GHz:0.04%, 1.54 GHz:0.02%, 1.61 GHz:0.02%, 1.69 GHz:0.02%, 1.77 
GHz:0.13%, 1.84 GHz:0.04%, 1.92 GHz:0.04%, 2.00 GHz:0.02%, 2.09 
GHz:0.03%, 2.17 GHz:0.02%, 2.25 GHz:0.02%, 2.32 GHz:0.01%, 2.40 
GHz:0.02%, 2.48 GHz:0.02%, 2.55 GHz:0.02%, 2.65 GHz:0.02%, 2.75 
GHz:0.02%, 2.84 GHz:44.38%, 2.96 GHz:0.00%  (8066)

After removing this patchset, and rebooting and just compiling zellij:

analyzing CPU 4:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:16.01%, 902 MHz:0.08%, 979 MHz:0.05%, 1.06 
GHz:0.06%, 1.21 GHz:0.37%, 1.29 GHz:0.17%, 1.36 GHz:0.15%, 1.46 
GHz:0.20%, 1.54 GHz:0.18%, 1.61 GHz:0.21%, 1.69 GHz:0.17%, 1.77 
GHz:0.22%, 1.84 GHz:0.32%, 1.92 GHz:0.37%, 2.00 GHz:0.22%, 2.09 
GHz:0.20%, 2.17 GHz:0.20%, 2.25 GHz:0.19%, 2.32 GHz:0.19%, 2.40 
GHz:0.21%, 2.48 GHz:0.18%, 2.55 GHz:0.18%, 2.65 GHz:0.21%, 2.75 
GHz:0.16%, 2.84 GHz:79.49%, 2.96 GHz:0.03%  (5315)
analyzing CPU 5:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:16.01%, 902 MHz:0.08%, 979 MHz:0.05%, 1.06 
GHz:0.06%, 1.21 GHz:0.37%, 1.29 GHz:0.17%, 1.36 GHz:0.15%, 1.46 
GHz:0.20%, 1.54 GHz:0.18%, 1.61 GHz:0.21%, 1.69 GHz:0.17%, 1.77 
GHz:0.22%, 1.84 GHz:0.32%, 1.92 GHz:0.37%, 2.00 GHz:0.22%, 2.09 
GHz:0.20%, 2.17 GHz:0.20%, 2.25 GHz:0.19%, 2.32 GHz:0.19%, 2.40 
GHz:0.21%, 2.48 GHz:0.18%, 2.55 GHz:0.18%, 2.65 GHz:0.21%, 2.75 
GHz:0.16%, 2.84 GHz:79.49%, 2.96 GHz:0.03%  (5315)
analyzing CPU 6:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:16.01%, 902 MHz:0.08%, 979 MHz:0.05%, 1.06 
GHz:0.06%, 1.21 GHz:0.37%, 1.29 GHz:0.17%, 1.36 GHz:0.15%, 1.46 
GHz:0.20%, 1.54 GHz:0.18%, 1.61 GHz:0.21%, 1.69 GHz:0.17%, 1.77 
GHz:0.22%, 1.84 GHz:0.32%, 1.92 GHz:0.37%, 2.00 GHz:0.22%, 2.09 
GHz:0.20%, 2.17 GHz:0.20%, 2.25 GHz:0.19%, 2.32 GHz:0.19%, 2.40 
GHz:0.21%, 2.48 GHz:0.18%, 2.55 GHz:0.18%, 2.65 GHz:0.21%, 2.75 
GHz:0.16%, 2.84 GHz:79.49%, 2.96 GHz:0.03%  (5315)
analyzing CPU 7:
   driver: qcom-cpufreq-hw
   CPUs which run at the same hardware frequency: 4 5 6 7
   CPUs which need to have their frequency coordinated by software: 4 5 6 7
   maximum transition latency: 4294.55 ms.
   hardware limits: 826 MHz - 2.96 GHz
   available frequency steps: 826 MHz, 902 MHz, 979 MHz, 1.06 GHz, 1.21 
GHz, 1.29 GHz, 1.36 GHz, 1.46 GHz, 1.54 GHz, 1.61 GHz, 1.69 GHz, 1.77 
GHz, 1.84 GHz, 1.92 GHz, 2.00 GHz, 2.09 GHz, 2.17 GHz, 2.25 GHz, 2.32 
GHz, 2.40 GHz, 2.48 GHz, 2.55 GHz, 2.65 GHz, 2.75 GHz, 2.84 GHz
   available cpufreq governors: ondemand, conservative, powersave, 
userspace, performance, schedutil
   current policy: frequency should be within 826 MHz and 2.84 GHz.
                   The governor "schedutil" may decide which speed to use
                   within this range.
   current CPU frequency is 2.84 GHz.
   cpufreq stats: 826 MHz:16.01%, 902 MHz:0.08%, 979 MHz:0.05%, 1.06 
GHz:0.06%, 1.21 GHz:0.37%, 1.29 GHz:0.17%, 1.36 GHz:0.15%, 1.46 
GHz:0.20%, 1.54 GHz:0.18%, 1.61 GHz:0.21%, 1.69 GHz:0.17%, 1.77 
GHz:0.22%, 1.84 GHz:0.32%, 1.92 GHz:0.37%, 2.00 GHz:0.22%, 2.09 
GHz:0.20%, 2.17 GHz:0.20%, 2.25 GHz:0.19%, 2.32 GHz:0.19%, 2.40 
GHz:0.21%, 2.48 GHz:0.18%, 2.55 GHz:0.18%, 2.65 GHz:0.21%, 2.75 
GHz:0.16%, 2.84 GHz:79.49%, 2.96 GHz:0.03%  (5315)

>>
>> Thank you for the fast response!
>>
>> -- steev
>>
>