[PATCH 2/5] arm64: dts: imx8mm: Add CSI nodes

[Adam Ford]

There is a csi bridge and csis interface that tie together
to allow csi2 capture.

Signed-off-by: Adam Ford <aford173 at gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 51 +++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..1f69c14d953f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1068,6 +1068,22 @@ aips4: bus at 32c00000 {
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
 
+			csi: csi at 32e20000 {
+				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+				reg = <0x32e20000 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+				status = "disabled";
+
+				port {
+					csi_in: endpoint {
+						remote-endpoint = <&imx8mm_mipi_csi_out>;
+					};
+				};
+			};
+
 			disp_blk_ctrl: blk-ctrl at 32e28000 {
 				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
 				reg = <0x32e28000 0x100>;
@@ -1095,6 +1111,41 @@ disp_blk_ctrl: blk-ctrl at 32e28000 {
 				#power-domain-cells = <1>;
 			};
 
+			mipi_csi: mipi-csi at 32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
+						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+					};
+
+					port at 1 {
+						reg = <1>;
+
+						imx8mm_mipi_csi_out: endpoint {
+							remote-endpoint = <&csi_in>;
+						};
+					};
+				};
+			};
+
 			usbotg1: usb at 32e40000 {
 				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
 				reg = <0x32e40000 0x200>;
-- 
2.32.0