[PATCH] ARM: dts: aspeed: tyan-s7106: Update nct7802 config

Oskar Senft osk at google.com
Thu Nov 4 14:09:14 PDT 2021


This change updates the configuration for the nct7802 hardware
monitor to correctly configure its temperature sensors.

Signed-off-by: Oskar Senft <osk at google.com>
---
 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 23 +++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
index 68f332ee1886..fc1585f34a57 100644
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -213,6 +213,29 @@ &i2c0 {
 	nct7802 at 28 {
 		compatible = "nuvoton,nct7802";
 		reg = <0x28>;
+		channel at 0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+		channel at 1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel at 2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel at 3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
 	};
 
 	/* Also connected to:
-- 
2.34.0.rc0.344.g81b53c2807-goog




More information about the linux-arm-kernel mailing list