[PATCH v1 0/4] support the Librem 5 front camera

[Martin Kepplinger]

hi Shawn and all whom this concerns,

3 weeks ago I sent this as RFC that didn't yield feedback, see below :)
Here's the same patches as a proper patchset ready to apply.

The first patch adds a shared "r3.dtsi" and is only refactoring.
Patch 2 that describes the power supplies on the Librem 5 board as regulators.
Patch 3 and 4 should be straight forward camera descriptions according to
the drivers.

thank you,
                             martin

revision history
----------------
RFC v1:
  https://lore.kernel.org/phone-devel/20211015083506.4182875-1-martin.kepplinger@puri.sm/
  and more specifically thoughts on patch 2:
  https://lore.kernel.org/phone-devel/20211015083506.4182875-3-martin.kepplinger@puri.sm/


Martin Kepplinger (4):
  arm64: dts: split out a shared imx8mq-librem5-r3.dtsi description
  arm64: dts: imx8mq-librem5: describe power supply for cameras
  arm64: dts: imx8mq-librem5: describe the selfie cam
  arm64: dts: imx8mq-librem5-r3.dtsi: describe selfie cam XSHUTDOWN pin

 .../boot/dts/freescale/imx8mq-librem5-r3.dts  | 25 +----
 .../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 45 +++++++++
 .../boot/dts/freescale/imx8mq-librem5-r4.dts  | 16 +---
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 96 ++++++++++++++++++-
 4 files changed, 144 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi

-- 
2.30.2