[PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series

[Jesse Taube]

On 11/2/21 19:17, Fabio Estevam wrote:
> On Tue, Nov 2, 2021 at 7:57 PM Jesse Taube <mr.bossman075 at gmail.com> wrote:
> 
>>   static struct esdhc_soc_data usdhc_imx8qxp_data = {
>>          .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
>> @@ -357,6 +363,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
>>          { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
>>          { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
>>          { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
>> +       { .compatible = "fsl,imxrt-usdhc", .data = &usdhc_imxrt_data, },
> 
> I thought Rob suggested to use the SoC name, so this would be:
> 
Uh i think that may have been for the UART.
> { .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, },
> 
> The same applies to the other bindings in the series.
> 
> This way it would be possible to differentiate between future
> supported i.MX RT devices.
> 
This makes sense will do in V3.