[PATCH] PCI: Marvell: Update PCIe fixup

Thomas Bogendoerfer tsbogend at alpha.franken.de
Tue Nov 2 08:02:01 PDT 2021


On Tue, Nov 02, 2021 at 11:00:34AM +0100, Pali Rohár wrote:
> > > But I do not have this hardware to verify it.
> > 
> > I still have a few Cobalt systems here.
> 
> Perfect! It would help if you could provide 'lspci -nn -vv' output from
> that system. In case you have very old version of lspci on that system
> you could try to run it with '-xxxx' (or '-xxx') which prints hexdump
> and I can parse it with local lspci.

not sure, if you still needed:

root at raq2:~# lspci -nn -vv
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:4146] (rev 11)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 0
	Region 1: Memory at 08000000 (32-bit, non-prefetchable) [size=128M]
	Region 2: Memory at 1c000000 (32-bit, non-prefetchable) [size=32M]
	Region 3: Memory at 1f000000 (32-bit, non-prefetchable) [size=16M]
	Region 4: Memory at 14000000 (32-bit, non-prefetchable) [size=4K]
	Region 5: I/O ports at 4000000 [disabled] [size=4K]


root at raq2:~# lspci -xxxx
00:00.0 Host bridge: Marvell Technology Group Ltd. Device 4146 (rev 11)
00: ab 11 46 41 06 00 80 a2 11 00 80 05 08 40 00 00
10: 00 00 00 00 00 00 00 08 00 00 00 1c 00 00 00 1f
20: 00 00 00 14 01 00 00 14 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]



More information about the linux-arm-kernel mailing list