[PATCH v2 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller

[Laurent Pinchart]

Hi Martin,

Thank you for the patch.

On Mon, May 31, 2021 at 01:23:24PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 162 ++++++++++++++++++
>  1 file changed, 162 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..4e3b17c220fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP and i.MX8MQ MIPI CSI-2 receiver

s/and //

> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger at puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 4

A description of each clock would be nice.

> +
> +  clock-names:
> +    minItems: 4

You can drop this, it's the default with 4 items listed below.

> +    items:
> +      - const: core
> +      - const: esc
> +      - const: pxl
> +      - const: clko2
> +
> +  assigned-clocks:
> +    maxItems: 3
> +
> +  assigned-clock-rates:
> +    maxItems: 3
> +
> +  assigned-clock-parents:
> +    maxItems: 3

Those properties shouldn't be part of the bindings, it's a system
configuration policy.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  phy-reset:
> +    description:
> +      The phandle to the imx8mq reset-controller.
> +    maxItems: 1
> +
> +  phy-gpr:
> +    description:
> +      The phandle to the imx8mq syscon iomux-gpr.
> +    maxItems: 1
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node

    required:
      - port at 0
      - port at 1

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-rates
> +  - assigned-clock-parents
> +  - power-domains
> +  - phy-reset
> +  - phy-gpr
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +
> +    mipi_csi1 at 30a70000 {
> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>; /* MIPI CSI1 Controller base addr */
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                 <&clk IMX8MQ_CLK_CLKO2>;
> +        clock-names = "core", "esc", "pxl", "clko2";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        phy-reset = <&src>;
> +        phy-gpr = <&iomuxc_gpr>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port at 0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port at 1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart