[PATCH 1/2] arm64: dts: imx8mm-evk: disable over current for usb1

[Li Jun]

imx8mm evk board usb1 port does not support over current detection,
so disable it.

Signed-off-by: Li Jun <jun.li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 6518f088b2c2..e033d0257b5a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -314,6 +314,7 @@ &usbotg1 {
 	srp-disable;
 	adp-disable;
 	usb-role-switch;
+	disable-over-current;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	status = "okay";
-- 
2.25.1