[PATCH 1/5] usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.h

Chunfeng Yun chunfeng.yun at mediatek.com
Thu May 27 23:10:56 PDT 2021


It's defined and only used in the same file, so remove its declaration
in mtu3.h, and make it static

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 drivers/usb/mtu3/mtu3.h      | 1 -
 drivers/usb/mtu3/mtu3_core.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index aef0a0bba25a..a8a7ee11f7b7 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -422,7 +422,6 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
 		int interval, int burst, int mult);
 void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep);
 void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set);
-void mtu3_ep0_setup(struct mtu3 *mtu);
 void mtu3_start(struct mtu3 *mtu);
 void mtu3_stop(struct mtu3 *mtu);
 void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index b3b459937566..2ef528f39ba3 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -536,7 +536,7 @@ static void get_ep_fifo_config(struct mtu3 *mtu)
 		rx_fifo->base, rx_fifo->limit);
 }
 
-void mtu3_ep0_setup(struct mtu3 *mtu)
+static void mtu3_ep0_setup(struct mtu3 *mtu)
 {
 	u32 maxpacket = mtu->g.ep0->maxpacket;
 	u32 csr;
-- 
2.18.0


More information about the linux-arm-kernel mailing list