[PATCH v3 2/5] arm64: dts: ti: k3-am64-main: Add PCIe DT node

[Nishanth Menon]

On 19:59-20210526, Kishon Vijay Abraham I wrote:
> AM64 has one PCIe instance which can be configured in either
> host mode (RC) or device mode (EP). Add PCIe DT node for host
> mode and device mode here.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 46 ++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index a67f10406a8e..9c77f7da5d28 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -728,4 +728,50 @@
>  			#clock-cells = <1>;
>  		};
>  	};
> +
> +	pcie0_rc: pcie at f102000 {
> +		compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host";
> +		reg = <0x00 0x0f102000 0x00 0x1000>,
> +		      <0x00 0x0f100000 0x00 0x400>,
> +		      <0x00 0x0d000000 0x00 0x00800000>,
> +		      <0x00 0x68000000 0x00 0x00001000>;
> +		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
[...]
> +
> +	pcie0_ep: pcie-ep at f102000 {
Hmm... 
Warning (unique_unit_address): /bus at f4000/pcie at f102000: duplicate unit-address (also used in node /bus at f4000/pcie-ep at f102000)
we could pick reg for pcie-ep for node address, instead of intd_cfg address?

OR, does that mess something else up?

> +		compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
> +		reg = <0x00 0x0f102000 0x00 0x1000>,
> +		      <0x00 0x0f100000 0x00 0x400>,
> +		      <0x00 0x0d000000 0x00 0x00800000>,
> +		      <0x00 0x68000000 0x00 0x08000000>;

[...]

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D