[BUG] rockpro64: PCI BAR reassignment broken by commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Rob Herring
robh at kernel.org
Wed May 26 08:37:57 PDT 2021
On Tue, May 25, 2021 at 03:54:30PM +0200, Ard Biesheuvel wrote:
> On Tue, 25 May 2021 at 15:42, Punit Agrawal <punitagrawal at gmail.com> wrote:
> >
> > Hi Ard,
> >
> > Ard Biesheuvel <ardb at kernel.org> writes:
> >
> > > On Sun, 23 May 2021 at 13:06, Punit Agrawal <punitagrawal at gmail.com> wrote:
> > >>
> > >> Robin Murphy <robin.murphy at arm.com> writes:
> > >>
> > >> > [ +linux-pci for visibility ]
> > >> >
> > >> > On 2021-05-18 10:09, Alexandru Elisei wrote:
> > >> >> After doing a git bisect I was able to trace the following error when booting my
> > >> >> rockpro64 v2 (rk3399 SoC) with a PCIE NVME expansion card:
> > >> >> [..]
> > >> >> [ 0.305183] rockchip-pcie f8000000.pcie: host bridge /pcie at f8000000 ranges:
> > >> >> [ 0.305248] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff ->
> > >> >> 0x00fa000000
> > >> >> [ 0.305285] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff ->
> > >> >> 0x00fbe00000
> > >> >> [ 0.306201] rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy
> > >> >> regulator
> > >> >> [ 0.306334] rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy
> > >> >> regulator
> > >> >> [ 0.373705] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
> > >> >> [ 0.373730] pci_bus 0000:00: root bus resource [bus 00-1f]
> > >> >> [ 0.373751] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
> > >> >> [ 0.373777] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus
> > >> >> address [0xfbe00000-0xfbefffff])
> > >> >> [ 0.373839] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
> > >> >> [ 0.373973] pci 0000:00:00.0: supports D1
> > >> >> [ 0.373992] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
> > >> >> [ 0.378518] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]),
> > >> >> reconfiguring
> > >> >> [ 0.378765] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
> > >> >> [ 0.378869] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
> > >> >> [ 0.379051] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
> > >> >> [ 0.379661] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by
> > >> >> 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe
> > >> >> x4 link)
> > >> >> [ 0.393269] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
> > >> >> [ 0.393311] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
> > >> >> [ 0.393333] pci 0000:00:00.0: BAR 14: failed to assign [mem size 0x00100000]
> > >> >> [ 0.393356] pci 0000:01:00.0: BAR 0: no space for [mem size 0x00004000 64bit]
> > >> >> [ 0.393375] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00004000 64bit]
> > >> >> [ 0.393397] pci 0000:00:00.0: PCI bridge to [bus 01]
> > >> >> [ 0.393839] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
> > >> >> [ 0.394165] pcieport 0000:00:00.0: AER: enabled with IRQ 78
> > >> >> [..]
> > >> >> to the commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to
> > >> >> resource flags for
> > >> >> 64-bit memory addresses").
> > >> >
> > >> > FWFW, my hunch is that the host bridge advertising no 32-bit memory
> > >> > resource, only only a single 64-bit non-prefetchable one (even though
> > >> > it's entirely below 4GB) might be a bit weird and tripping something
> > >> > up in the resource assignment code. It certainly seems like the thing
> > >> > most directly related to the offending commit.
> > >> >
> > >> > I'd be tempted to try fiddling with that in the DT (i.e. changing
> > >> > 0x83000000 to 0x82000000 in the PCIe node's "ranges" property) to see
> > >> > if it makes any difference. Note that even if it helps, though, I
> > >> > don't know whether that's the correct fix or just a bodge around a
> > >> > corner-case bug somewhere in the resource code.
> > >>
> > >> From digging into this further the failure seems to be due to a mismatch
> > >> of flags when allocating resources in pci_bus_alloc_from_region() -
> > >>
> > >> if ((res->flags ^ r->flags) & type_mask)
> > >> continue;
> > >>
> > >> Though I am also not sure why the failure is only being reported on
> > >> RK3399 - does a single 64-bit window have anything to do with it?
> > >>
> > >
> > > The NVMe in the example exposes a single 64-bit non-prefetchable BAR.
> > > Such BARs can not be allocated in a prefetchable host bridge window
> > > (unlike the converse, i.e., allocating a prefetchable BAR in a
> > > non-prefetchable host bridge window is fine)
> > >
> > > 64-bit non-prefetchable host bridge windows cannot be forwarded by PCI
> > > to PCI bridges, they simply lack the BAR registers to describe them.
> > > Therefore, non-prefetchable endpoint BARs (even 64-bit ones) need to
> > > be carved out of a host bridge's non-prefetchable 32-bit window if
> > > they need to pass through a bridge.
> >
> > Thank you for the explanation. I also looked at the PCI-to-PCI Bridge
> > spec to understand where some of the limitations are coming from.
> >
> > > So the error seems to be here that the host bridge's 32-bit
> > > non-prefetchable window has the 64-bit attribute set, even though it
> > > resides below 4 GB entirely. I suppose that the resource allocation
> > > could be made more forgiving (and it was in the past, before commit
> > > 9d57e61bf723 was applied). However, I would strongly recommend not
> > > deviating from common practice, and just describe the 32-bit
> > > addressable non-prefetchable resource window as such.
> >
> > IIUC, the host bridge's configuration (64-bit on non-prefetchable
> > window) is based on what the hardware advertises.
> >
>
> What do you mean by 'what the hardware advertises'? The host bridge is
> apparently configured to decode a 32-bit addressable window as MMIO,
> and the question is why this window has the 64-bit attribute set in
> the DT description.
>
> > Can you elaborate on what you have in mind to correct the
> > non-prefetchable resource window? Are you thinking of adding a quirk
> > somewhere to address this?
> >
>
> No. Just fix the DT.
We can't only fix the DT as we shouldn't require a DT update due to a
kernel change. Especially for RK3399 which is pretty stable and widely
used.
Do I understand correctly that 64-bit non-prefetchable never correct? We
recently gained a warning for this in commit fede8526cc48 ("PCI: of:
Warn if non-prefetchable memory aperture size is > 32-bit"), but that
only looks at addresses, not the 64-bit flag. Can't we just not set
the 64-bit flag if non-prefetchable?
BTW, the DT schema is checking ranges hi cell:
- 0x01000000
- 0x02000000
- 0x03000000
- 0x42000000
- 0x43000000
- 0x81000000
- 0x82000000
- 0x83000000
- 0xc2000000
- 0xc3000000
I just went with what I found in dts files. Sounds like 03 and 83 should
be removed. (Really, bit 31 or relocatable should probably not be set
either.)
There's a number of other cases:
Documentation/devicetree/bindings/numa.txt: ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x70 0x00000000>;
Documentation/devicetree/bindings/numa.txt: ranges = <0x03000000 0x9010 0x00000000 0x9010 0x00000000 0x70 0x00000000>;
Documentation/devicetree/bindings/pci/mediatek-pcie.txt- 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml: ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
Documentation/devicetree/bindings/pci/mobiveil-pcie.txt: ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt: ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
arch/arm/boot/dts/mt7623.dtsi- 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi: ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi: ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi: ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi: ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>;
arch/arm64/boot/dts/rockchip/rk3399.dtsi: ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
Rob
More information about the linux-arm-kernel
mailing list