[PATCH v1 4/4] PCI: brcmstb: add shutdown call to driver

[Bjorn Helgaas]

Capitalize "Add" in the subject.

On Tue, Apr 27, 2021 at 01:51:39PM -0400, Jim Quinlan wrote:
> The shutdown() call is similar to the remove() call except the former does
> not need to invoke pci_{stop,remove}_root_bus(), and besides, errors occur
> if it does.

This doesn't explain why shutdown() is necessary.  "errors occur"
might be a hint, except that AFAICT, many similar drivers do invoke
pci_stop_root_bus() and pci_remove_root_bus() (several of them while
holding pci_lock_rescan_remove()), without implementing .shutdown().

It is ... unfortunate that there's such a variety of implementations
here.  I don't believe these driver differences are all necessary
consequences of hardware differences.

> Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index d3af8d84f0d6..a1fe1a2ada48 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -1340,6 +1340,15 @@ static int brcm_pcie_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static void brcm_pcie_shutdown(struct platform_device *pdev)
> +{
> +	struct brcm_pcie *pcie = platform_get_drvdata(pdev);
> +
> +	if (pcie->has_err_report)
> +		brcm_unregister_die_notifiers(pcie);
> +	__brcm_pcie_remove(pcie);
> +}
> +
>  static const struct of_device_id brcm_pcie_match[] = {
>  	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
>  	{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
> @@ -1460,6 +1469,7 @@ static const struct dev_pm_ops brcm_pcie_pm_ops = {
>  static struct platform_driver brcm_pcie_driver = {
>  	.probe = brcm_pcie_probe,
>  	.remove = brcm_pcie_remove,
> +	.shutdown = brcm_pcie_shutdown,
>  	.driver = {
>  		.name = "brcm-pcie",
>  		.of_match_table = brcm_pcie_match,
> -- 
> 2.17.1
>