[BUG] rockpro64: PCI BAR reassignment broken by commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")

[Ard Biesheuvel]

On Tue, 25 May 2021 at 21:15, Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> On Tue, May 25, 2021 at 05:54:56PM +0200, Ard Biesheuvel wrote:
> > On Tue, 25 May 2021 at 17:34, Peter Geis <pgwipeout at gmail.com> wrote:
>
> > > > > >> > On 2021-05-18 10:09, Alexandru Elisei wrote:
> > > > > >> >> [..]
> > > > > >> >> [    0.305183] rockchip-pcie f8000000.pcie: host bridge /pcie at f8000000 ranges:
> > > > > >> >> [    0.305248] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
> > > > > >> >> [    0.305285] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
> > > > > >> >> [    0.373705] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
> > > > > >> >> [    0.373730] pci_bus 0000:00: root bus resource [bus 00-1f]
> > > > > >> >> [    0.373751] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
> > > > > >> >> [    0.373777] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
>
> > ... For some reason, lspci translates the BAR values to CPU
> > addresses, but the PCI side addresses are within 32-bits.
>
> lspci shows BARs as CPU physical addresses by default.  These are the
> same addresses you would see in pdev->resource[n] and the same as BAR
> values you would see in dmesg.
>
> A 64-bit CPU physical address can certainly be translated by the host
> bridge to a 32-bit PCI address.  But that's not happening here because
> this host bridge applies no translation (CPU physical 0xfa000000 maps
> to bus address 0xfa000000).
>
> "lspci -b" shows the PCI bus addresses.

Ah, thanks.

It does seem, though, that the information overload in this thread is
causing confusion now. Peter shared some log output where there is
definitely MMIO translation being applied.

> > [    6.673497] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
> > (bus address [0x3f700000-0x3f7fffff])
> > [    6.674642] pci_bus 0000:00: root bus resource [mem
> > 0x300000000-0x33f6fffff] (bus address [0x00000000-0x3f6fffff])

In this case, the I/O translation definitely looks wrong. On a typical
ARM DT system, you will see something like

[    1.500324] Remapped I/O 0x0000000067f00000 to [io  0x0000-0xffff window]
[    1.500522] pci_bus 0000:00: root bus resource [io  0x0000-0xffff window]

The MMIO window looks correct, but I suspect that both 0x82000000 and
0x83000000 in the DT ranges are describing the resource window as
prefetchable, preventing the allocation of non-prefetchable BARs in
this window.

Peter, for the configuration listed here, could you try something like

ranges = <0x1000000 0x0 0x0 [IO base in the CPU address map] [IO size]>,
         <0x2000000 0x0 0x0 [MMIO base in the CPU address map] [MMIO size]>;