[PATCH 1/1] arm64: dts: lx2160a: Normalize the compatible string of "arm, sbsa-uart"

[Leizhen (ThunderTown)]

On 2021/5/25 1:36, Mark Kettenis wrote:
>> From: Zhen Lei <thunder.leizhen at huawei.com>
>> Date: Mon, 24 May 2021 11:52:44 +0800
>> Content-Type: text/plain; charset="us-ascii"
>>
>> The compatible string of ARM SBSA defined generic UART needs to contain
>> only "arm,sbsa-uart" and does not need to contain "arm,pl011". Otherwise,
>> the pl011.yaml will check it and falsely report many warnings similar to
>> the following:
>>
>> arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dt.yaml:
>>  serial at 21c0000: compatible:0: 'arm,pl011' was expected
>>  serial at 21c0000: compatible:1: 'arm,primecell' was expected
>>
>> Delete the redundant "arm,pl011" to fix it.
> 
> According to its reference manual, the LX2160A has a full PL011
> implementation.  So I think this is the wrong "fix".

No, No, Please refer: https://www.spinics.net/lists/devicetree/msg424054.html

Now the "arm,sbsa-uart" driver is mixed with amba-pl011.c，It's impossible
"arm,pl011" is loaded but "arm,sbsa-uart" is not loaded. So it makes no sense
to append "arm, pl011" to the end of the compatible string as an alternative
driver.

drivers/tty/serial/amba-pl011.c:2784:       { .compatible = "arm,sbsa-uart", },


> 
>> Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
>> ---
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> index 4fcc869c21a4..417546616d85 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> @@ -920,7 +920,7 @@
>>  		};
>>  
>>  		uart0: serial at 21c0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,sbsa-uart";
>>  			reg = <0x0 0x21c0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>>  			current-speed = <115200>;
>> @@ -928,7 +928,7 @@
>>  		};
>>  
>>  		uart1: serial at 21d0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,sbsa-uart";
>>  			reg = <0x0 0x21d0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>>  			current-speed = <115200>;
>> @@ -936,7 +936,7 @@
>>  		};
>>  
>>  		uart2: serial at 21e0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,sbsa-uart";
>>  			reg = <0x0 0x21e0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>>  			current-speed = <115200>;
>> @@ -944,7 +944,7 @@
>>  		};
>>  
>>  		uart3: serial at 21f0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,sbsa-uart";
>>  			reg = <0x0 0x21f0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
>>  			current-speed = <115200>;
>> -- 
>> 2.21.1
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 
> .
>