[boot-wrapper PATCH v2 2/8] aarch64: Rename labels and prepare for lower EL booting
Jaxson Han
Jaxson.Han at arm.com
Mon May 24 18:54:33 PDT 2021
Hi Andre,
> -----Original Message-----
> From: Andre Przywara <andre.przywara at arm.com>
> Sent: Monday, May 24, 2021 5:32 PM
> To: Jaxson Han <Jaxson.Han at arm.com>
> Cc: Mark Rutland <Mark.Rutland at arm.com>; linux-arm-
> kernel at lists.infradead.org; Wei Chen <Wei.Chen at arm.com>
> Subject: Re: [boot-wrapper PATCH v2 2/8] aarch64: Rename labels and
> prepare for lower EL booting
>
> On Fri, 21 May 2021 18:48:01 +0800
> Jaxson Han <jaxson.han at arm.com> wrote:
>
> > Prepare for booting from lower EL. Rename *_el3 relavant labels with
> > *_el_max and *_no_el3 with *_keep_el. Since the original _no_el3 means
> > "We neither do init sequence at this highest EL nor drop to lower EL
> > when entering to kernel", we rename it with _keep_el to make it more
> > clear for lower EL initialisation.
>
> Thanks for splitting out this patch, I verified that most of it is indeed just
> renames, apart from the things below:
>
> >
> > Signed-off-by: Jaxson Han <jaxson.han at arm.com>
> > ---
> > arch/aarch64/boot.S | 33 ++++++++++++++++++++++-----------
> > arch/aarch64/include/asm/cpu.h | 3 +++
> > arch/aarch64/psci.S | 13 +++++++------
> > arch/aarch64/spin.S | 8 ++++----
> > 4 files changed, 36 insertions(+), 21 deletions(-)
> >
> > diff --git a/arch/aarch64/boot.S b/arch/aarch64/boot.S index
> > a9264de..e4f5f3d 100644
> > --- a/arch/aarch64/boot.S
> > +++ b/arch/aarch64/boot.S
> > @@ -12,7 +12,7 @@
> > .section .init
> >
> > .globl _start
> > - .globl jump_kernel
> > + .globl jump_kernel
> >
> > _start:
> > cpuid x0, x1
> > @@ -22,20 +22,31 @@ _start:
> > bl setup_stack
> >
> > /*
> > - * EL3 initialisation
> > + * Boot sequence
> > + * If CurrentEL == EL3, then goto EL3 initialisation and drop to
> > + * lower EL before entering the kernel.
> > + * Else, no initialisation and keep the current EL before
> > + * entering the kernel.
> > */
> > mrs x0, CurrentEL
> > cmp x0, #CURRENTEL_EL3
> > - b.eq 1f
> > + beq el3_init
> >
> > + /*
> > + * We stay in the current EL for entering the kernel
> > + */
> > mov w0, #1
> > - ldr x1, =flag_no_el3
> > + ldr x1, =flag_keep_el
> > str w0, [x1]
> >
> > bl setup_stack
> > - b start_no_el3
> > + b start_keep_el
> >
> > -1: mov x0, #0x30 // RES1
> > + /*
> > + * EL3 initialisation
> > + */
> > +el3_init:
> > + mov x0, #0x30 // RES1
> > orr x0, x0, #(1 << 0) // Non-secure EL1
> > orr x0, x0, #(1 << 8) // HVC enable
> >
> > @@ -114,7 +125,7 @@ _start:
> >
> > bl gic_secure_init
> >
> > - b start_el3
> > + b start_el_max
> >
> > err_invalid_id:
> > b .
> > @@ -141,7 +152,7 @@ jump_kernel:
> > bl find_logical_id
> > bl setup_stack // Reset stack pointer
> >
> > - ldr w0, flag_no_el3
> > + ldr w0, flag_keep_el
> > cmp w0, #0 // Prepare Z flag
> >
> > mov x0, x20
> > @@ -150,9 +161,9 @@ jump_kernel:
> > mov x3, x23
> >
> > b.eq 1f
> > - br x19 // No EL3
> > + br x19 // Keep current EL
> >
> > -1: mov x4, #SPSR_KERNEL
> > +1: ldr w4, #SPSR_KERNEL
>
> This looks both premature and wrong: The value of SPSR_KERNEL doesn't
> change here, so doesn't need any change in this instruction. Plus: ldr without
> '=' requires an address, not a value, and this in fact already breaks
> compilation:
> arch/aarch64/boot.S:166: Error: immediate value must be a multiple of 4 at
> operand 2 -- `ldr w4,#((1<<8)|(1<<9)|(1<<7)|(1<<6)|(9<<0))'
>
> So please remove this change, and also the changes in cpu.h below, and
> introduce them only when they are actually needed.
>
> Apart from the rest is then really just renames.
Right, I made a mistake. I will fix this and move them into patch 5.
Thanks,
Jaxson
>
> Cheers,
> Andre
>
>
> >
> > /*
> > * If bit 0 of the kernel address is set, we're entering in AArch32
> > @@ -168,5 +179,5 @@ jump_kernel:
> >
> > .data
> > .align 3
> > -flag_no_el3:
> > +flag_keep_el:
> > .long 0
> > diff --git a/arch/aarch64/include/asm/cpu.h
> > b/arch/aarch64/include/asm/cpu.h index ccb5397..2b3a0a4 100644
> > --- a/arch/aarch64/include/asm/cpu.h
> > +++ b/arch/aarch64/include/asm/cpu.h
> > @@ -11,6 +11,7 @@
> >
> > #define MPIDR_ID_BITS 0xff00ffffff
> >
> > +#define CURRENTEL_EL2 (2 << 2)
> > #define CURRENTEL_EL3 (3 << 2)
> >
> > /*
> > @@ -24,6 +25,7 @@
> > #define SPSR_I (1 << 7) /* IRQ masked */
> > #define SPSR_F (1 << 6) /* FIQ masked */
> > #define SPSR_T (1 << 5) /* Thumb */
> > +#define SPSR_EL1H (5 << 0) /* EL1 Handler mode */
> > #define SPSR_EL2H (9 << 0) /* EL2 Handler mode */
> > #define SPSR_HYP (0x1a << 0) /* M[3:0] = hyp, M[4] =
> AArch32 */
> >
> > @@ -42,6 +44,7 @@
> > #else
> > #define SCTLR_EL1_RESET SCTLR_EL1_RES1
> > #define SPSR_KERNEL (SPSR_A | SPSR_D | SPSR_I | SPSR_F |
> SPSR_EL2H)
> > +#define SPSR_KERNEL_EL1 (SPSR_A | SPSR_D | SPSR_I | SPSR_F |
> SPSR_EL1H)
> > #endif
> >
> > #ifndef __ASSEMBLY__
> > diff --git a/arch/aarch64/psci.S b/arch/aarch64/psci.S index
> > 01ebe7d..ae02fd6 100644
> > --- a/arch/aarch64/psci.S
> > +++ b/arch/aarch64/psci.S
> > @@ -45,8 +45,8 @@ vector:
> >
> > .text
> >
> > - .globl start_no_el3
> > - .globl start_el3
> > + .globl start_keep_el
> > + .globl start_el_max
> >
> > err_exception:
> > b err_exception
> > @@ -101,7 +101,7 @@ smc_exit:
> > eret
> >
> >
> > -start_el3:
> > +start_el_max:
> > ldr x0, =vector
> > bl setup_vector
> >
> > @@ -111,10 +111,11 @@ start_el3:
> > b psci_first_spin
> >
> > /*
> > - * This PSCI implementation requires EL3. Without EL3 we'll only boot
> > the
> > - * primary cpu, all others will be trapped in an infinite loop.
> > + * This PSCI implementation requires the highest EL(EL3 or Armv8-R EL2).
> > + * Without the highest EL, we'll only boot the primary cpu, all
> > + others
> > + * will be trapped in an infinite loop.
> > */
> > -start_no_el3:
> > +start_keep_el:
> > cpuid x0, x1
> > bl find_logical_id
> > cbz x0, psci_first_spin
> > diff --git a/arch/aarch64/spin.S b/arch/aarch64/spin.S index
> > 72603cf..533177c 100644
> > --- a/arch/aarch64/spin.S
> > +++ b/arch/aarch64/spin.S
> > @@ -11,11 +11,11 @@
> >
> > .text
> >
> > - .globl start_no_el3
> > - .globl start_el3
> > + .globl start_keep_el
> > + .globl start_el_max
> >
> > -start_el3:
> > -start_no_el3:
> > +start_el_max:
> > +start_keep_el:
> > cpuid x0, x1
> > bl find_logical_id
> >
More information about the linux-arm-kernel
mailing list