[PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{, 2}_in_sel

[Martin Blumenstingl]

Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
parent which is actually used is vid_pll_final_div. This should be set
using assigned-clock-parents in the .dts rather than removing some
"unwanted" clock parents from the clock driver.

Suggested-by: Jerome Brunet <jbrunet at baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
After a hint from Jerome (thanks) this is the improved version of
"clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]


[0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@googlemail.com/


 drivers/clk/meson/meson8b.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index a844d35b553a..0f8bd707217a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
 		.ops = &clk_regmap_mux_ro_ops,
 		.parent_hws = meson8b_vclk_mux_parent_hws,
 		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
 		.ops = &clk_regmap_mux_ro_ops,
 		.parent_hws = meson8b_vclk_mux_parent_hws,
 		.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
-- 
2.31.1