[Openipmi-developer] [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out

Corey Minyard minyard at acm.org
Mon May 24 08:41:19 PDT 2021


On Mon, May 24, 2021 at 10:23:36AM +0930, Andrew Jeffery wrote:
> 
> 
> On Sat, 22 May 2021, at 02:44, Corey Minyard wrote:
> > On Mon, May 10, 2021 at 03:12:02PM +0930, Andrew Jeffery wrote:
> > > Make the KCS device drivers responsible for allocating their own memory.
> > > 
> > > Until now the private data for the device driver was allocated internal
> > > to the private data for the chardev interface. This coupling required
> > > the slightly awkward API of passing through the struct size for the
> > > driver private data to the chardev constructor, and then retrieving a
> > > pointer to the driver private data from the allocated chardev memory.
> > > 
> > > In addition to being awkward, the arrangement prevents the
> > > implementation of alternative userspace interfaces as the device driver
> > > private data is not independent.
> > > 
> > > Peel a layer off the onion and turn the data-structures inside out by
> > > exploiting container_of() and embedding `struct kcs_device` in the
> > > driver private data.
> > 
> > All in all a very nice cleanup.  A few nits inline.
> > 
> > > 
> > > Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> > > Reviewed-by: Zev Weiss <zweiss at equinix.com>
> > > ---
> > >  drivers/char/ipmi/kcs_bmc.c           | 19 +++++++--
> > >  drivers/char/ipmi/kcs_bmc.h           | 12 ++----
> > >  drivers/char/ipmi/kcs_bmc_aspeed.c    | 56 +++++++++++++------------
> > >  drivers/char/ipmi/kcs_bmc_cdev_ipmi.c | 60 ++++++++++++++++++---------
> > >  drivers/char/ipmi/kcs_bmc_npcm7xx.c   | 37 ++++++++++-------
> > >  5 files changed, 111 insertions(+), 73 deletions(-)
> > > 
> > > diff --git a/drivers/char/ipmi/kcs_bmc.c b/drivers/char/ipmi/kcs_bmc.c
> > > index ef5c48ffe74a..83da681bf49e 100644
> > > --- a/drivers/char/ipmi/kcs_bmc.c
> > > +++ b/drivers/char/ipmi/kcs_bmc.c
> > > @@ -44,12 +44,23 @@ int kcs_bmc_handle_event(struct kcs_bmc *kcs_bmc)
> > >  }
> > >  EXPORT_SYMBOL(kcs_bmc_handle_event);
> > >  
> > > -struct kcs_bmc *kcs_bmc_ipmi_alloc(struct device *dev, int sizeof_priv, u32 channel);
> > > -struct kcs_bmc *kcs_bmc_alloc(struct device *dev, int sizeof_priv, u32 channel)
> > > +int kcs_bmc_ipmi_add_device(struct kcs_bmc *kcs_bmc);
> > 
> > The above (and it's remove function) should be in an include file.
> 
> This is a short-term hack while I'm refactoring the code. It goes away 
> in a later patch when we switch to using an ops struct.
> 
> I didn't move it to a header as it's an implementation detail at the 
> end of the day. I see headers as describing a public interface, and in 
> the bigger picture this function isn't part of the public API. But 
> maybe it's too tricky by half. My approach here generated some 
> discussion with Zev as well.
> 
> > 
> > > +void kcs_bmc_add_device(struct kcs_bmc *kcs_bmc)
> > 
> > This should return an error so the probe can be failed and cleaned up
> > and so confusing message don't get printed after this in one case.
> 
> Hmm. I did this because the end result of the series is that we can 
> have multiple chardev interfaces in distinct modules exposing the one 
> KCS device in the one kernel. If more than one of the chardev modules 
> is configured in and one of them fails to initialise themselves with 
> respect to the device driver I didn't think it was right to fail the 
> probe of the device driver (and thus remove any chardev interfaces that 
> did succeed to initialise against it).
> 
> But this does limit the usefulness of the device driver instance in the 
> case that only one of the chardev interfaces is configured in and it 
> fails to initialise.
> 
> So I think we need to decide on the direction before I adjust the 
> interface here. The patches are architected around the idea of multiple 
> chardevs being configured in to the kernel build and all are exposed at 
> runtime.

Ok, I understand.  The host IPMI driver will attempt to start all
interfaces, if none fail to come up it will return an error, but if any
come up it will not return an error.  So it's a similar situation.

I stole that from something else, but I can't remember what.  I don't
know what the best policy is, really, that was kind of a compromise and
nobody has complained about it.

I will say that the success print in aspeed_kcs_probe() needs to not
happen if there is a failure, though.

-corey

> 
> The serio subsystem does have the 'drvctl' sysfs knob that allows 
> userspace to dictate which serio chardev interface they want to connect 
> to a serio device driver. Maybe that's preferred over my "connect them 
> all" strategy?
> 
> Andrew
> 
> 
> _______________________________________________
> Openipmi-developer mailing list
> Openipmi-developer at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openipmi-developer



More information about the linux-arm-kernel mailing list