[PATCH v2] ARM: debug: add UART early console support for MSTAR SoCs

[Daniel Palmer]

Hi Romain,

On Wed, 5 May 2021 at 02:03, Romain Perier <romain.perier at gmail.com> wrote:
>
> This adds the debug_ll uart for the PM UART found on armv7-based MStar
> SoCs.
>
> Signed-off-by: Romain Perier <romain.perier at gmail.com>
> Acked-by: Daniel Palmer <daniel at thingy.jp>
> ---
>
> Changes since v1:
> - Renamed to DEBUG_MSTARV7_PMUART, so it matches the arch name
> - Improved the Kconfig description
> - Added Daniel's Acked-by
>
> ---
>  arch/arm/Kconfig.debug | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 36016497b1b3..1c673762ce7c 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -607,6 +607,14 @@ choice
>                   when u-boot hands over to the kernel, the system
>                   silently crashes, with no serial output at all.
>
> +       config DEBUG_MSTARV7_PMUART
> +               bool "Kernel low-level debugging messages via MSTARV7 PM UART"
> +               depends on ARCH_MSTARV7
> +               select DEBUG_UART_8250
> +               help
> +                 Say Y here if you want kernel low-level debugging support
> +                 for MSTAR ARMv7-based platforms on PM UART.
> +
>         config DEBUG_MT6589_UART0
>                 bool "Mediatek mt6589 UART0"
>                 depends on ARCH_MEDIATEK
> @@ -1605,6 +1613,7 @@ config DEBUG_UART_PHYS
>         default 0x18000400 if DEBUG_BCM_HR2
>         default 0x18023000 if DEBUG_BCM_IPROC_UART3
>         default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
> +       default 0x1f221000 if DEBUG_MSTARV7_PMUART
>         default 0x20001000 if DEBUG_HIP01_UART
>         default 0x20060000 if DEBUG_RK29_UART0
>         default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
> @@ -1722,6 +1731,7 @@ config DEBUG_UART_VIRT
>         default 0xf0100000 if DEBUG_DIGICOLOR_UA0
>         default 0xf01fb000 if DEBUG_NOMADIK_UART
>         default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
> +       default 0xf0221000 if DEBUG_MSTARV7_PMUART
>         default 0xf1000300 if DEBUG_BCM_5301X
>         default 0xf1000400 if DEBUG_BCM_HR2
>         default 0xf1002000 if DEBUG_MT8127_UART0
> @@ -1827,6 +1837,7 @@ config DEBUG_UART_8250_SHIFT
>         default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
>                 DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
>                 DEBUG_OMAP7XXUART3
> +       default 3 if DEBUG_MSTARV7_PMUART
>         default 2
>
>  config DEBUG_UART_8250_WORD
> --
> 2.30.2
>

Applied[0] with Linus' Reviewed-by and Mohammend's Tested-by.

Thanks,

Daniel

0 - https://github.com/linux-chenxing/linux/tree/mstar_for_v5_14