[PATCH V5 0/4] soc: imx: add i.MX BLK-CTL support

[Adam Ford]

On Fri, May 21, 2021 at 5:27 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan at nxp.com>
>
> V5:
>  Rework the blk-ctl driver to let sub-PGC use blk-ctl as parent power
>  domain to fix the potential handshake issue.
>  I still keep R-b/A-b tag for Patch 1,2,4, since very minor changes
>  I only drop R-b tag for Patch 3, since it has big change.
>  An example, the pgc_mipi not take pgc_dispmix as parent:
>
>         pgc_dispmix: power-domain at 10 {
>                 #power-domain-cells = <0>;
>                 reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
>                 clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
>                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
>                          <&clk IMX8MM_CLK_DISP_APB_ROOT>;
>         };
>
>         pgc_mipi: power-domain at 11 {
>                 #power-domain-cells = <0>;
>                 reg = <IMX8MM_POWER_DOMAIN_MIPI>;
>                 power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;

With this change, I get a bunch of errors on boot.  The list of
power-domains appear correct on the surface, but it also has trouble
waking from sleep.

[    0.695947] imx8mm-blk-ctl imx-dispmix-blk-ctl.0: invalid resource
[    0.702849] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.0 failed
with error -22
[    0.711259] imx8mm-blk-ctl imx-dispmix-blk-ctl.1: invalid resource
[    0.716451] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.1 failed
with error -22
[    0.724856] imx8mm-blk-ctl imx-dispmix-blk-ctl.2: invalid resource
[    0.730097] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.2 failed
with error -22
[    0.738398] imx8mm-blk-ctl imx-dispmix-blk-ctl.3: invalid resource
[    0.743747] imx8mm-blk-ctl: probe of imx-dispmix-blk-ctl.3 failed
with error -22

If I have a wrong device tree configuration, can you please post an
updated device tree?  I don't think an official patch for original
pgc's were pushed as part of either series. I used this e-mail as the
patch to enable the blk-ctl.

thanks,

adam

>         };
>
>         dispmix_blk_ctl: clock-controller at 32e28000 {
>                 compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
>                 reg = <0x32e28000 0x100>;
>                 #power-domain-cells = <1>;
>                 power-domains = <&pgc_dispmix>, <&pgc_mipi>;
>                 power-domain-names = "dispmix", "mipi";
>                 clocks = <&clk IMX8MM_CLK_DISP_ROOT>, <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
>                          <&clk IMX8MM_CLK_DISP_APB_ROOT>;
>         };
>
> V4:
>  Add R-b tag
>  Typo fix
>  Update the power domain macro names Per Abel and Frieder
>
> V3:
>  Add explaination for not listing items in patch 2 commit log Per Rob.
>  Addressed comments from Lucas and Frieder on patch [3,4].
>  A few comments from Jacky was ignored, because following gpcv2
>  coding style.
>
> V2:
>  Fix yaml check failure.
>
> Previously there is an effort from Abel that take BLK-CTL as clock
> provider, but it turns out that there is A/B lock issue and we are
> not able resolve that.
>
> Per discuss with Lucas and Jacky, we made an agreement that take BLK-CTL
> as a power domain provider and use GPC's domain as parent, the consumer
> node take BLK-CTL as power domain input.
>
> This patchset has been tested on i.MX8MM EVK board, but one hack
> is not included in the patchset is that the DISPMIX BLK-CTL
> MIPI_M/S_RESET not implemented. Per Lucas, we will finally have a MIPI
> DPHY driver, so fine to leave it.
>
> Thanks for Lucas's suggestion, Frieder Schrempf for collecting
> all the patches, Abel's previous BLK-CTL work, Jacky Bai on help
> debug issues.
>
>
> Peng Fan (4):
>   dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains
>   Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
>   soc: imx: Add generic blk-ctl driver
>   soc: imx: Add blk-ctl driver for i.MX8MM
>
>  .../bindings/soc/imx/fsl,imx-blk-ctl.yaml     |  66 ++++
>  drivers/soc/imx/Makefile                      |   2 +-
>  drivers/soc/imx/blk-ctl-imx8mm.c              | 139 ++++++++
>  drivers/soc/imx/blk-ctl.c                     | 311 ++++++++++++++++++
>  drivers/soc/imx/blk-ctl.h                     |  85 +++++
>  include/dt-bindings/power/imx8mm-power.h      |  13 +
>  6 files changed, 615 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx-blk-ctl.yaml
>  create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c
>  create mode 100644 drivers/soc/imx/blk-ctl.c
>  create mode 100644 drivers/soc/imx/blk-ctl.h
>
> --
> 2.30.0
>