[PATCH 1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema

[Geert Uytterhoeven]

The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -366,7 +366,7 @@ pcf_hdmi: gpio at 26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b44883e59..a64364443031525b 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@ &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -268,7 +268,7 @@ pcf_hdmi: pcf8575 at 26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -381,7 +381,7 @@ pcf_hdmi: pcf8575 at 26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
-- 
2.25.1