[PATCH v4 2/2] drivers/perf: hisi: Add driver for HiSilicon PCIe PMU

[liuqi (BA)]

On 2021/5/19 19:40, John Garry wrote:
> On 19/05/2021 10:49, Qi Liu wrote:
>> PCIe PMU Root Complex Integrated End Point(RCiEP) device is supported
>> to sample bandwidth, latency, buffer occupation etc.
>>
>> Each PMU RCiEP device monitors multiple Root Ports, and each RCiEP is
>> registered as a PMU in /sys/bus/event_source/devices, so users can
>> select target PMU, and use filter to do further sets.
>>
>> Filtering options contains:
>> event        - select the event.
>> subevent     - select the subevent.
>> port         - select target Root Ports. Information of Root Ports
>>                 are shown under sysfs.
>> bdf          - select requester_id of target EP device.
>> trig_len     - set trigger condition for starting event statistics.
>> trigger_mode - set trigger mode. 0 means starting to statistic when
>>                 bigger than trigger condition, and 1 means smaller.
>> thr_len      - set threshold for statistics.
>> thr_mode     - set threshold mode. 0 means count when bigger than
>>                 threshold, and 1 means smaller.
>>
>> Reviewed-by: John Garry <john.garry at huawei.com>
>> Signed-off-by: Qi Liu <liuqi115 at huawei.com>
> 
> JFYI, In light of this following series:
> https://lore.kernel.org/linux-arm-kernel/87v97fccq9.ffs@nanos.tec.linutronix.de/ 
> 
> 
> At some stage the irq_set_affinity_hint() calls need to be fixed up here 
> as well.
Hi John,

Seems irq_set_affinity_hint() need to be replaced by irq_set_affinity(). 
I'll fix this and send a new version latter.

Thanks,
Qi
> 
> Thanks,
> John
> 
> .