fw_devlink=on and sunxi HDMI

Ondřej Jirman megous at megous.com
Wed May 19 15:00:02 PDT 2021


Hello Saravana,

On Wed, May 19, 2021 at 02:29:48PM -0700, Saravana Kannan wrote:
> 
> Nothing in sun8i_hdmi_phy_probe() depends on anything from
> sun8i_dw_hdmi.c other than getting a struct device pointer to use with
> dev_err and some devm_* APIs. So it seems pretty straightforward to
> fix this so that you don't have one struct device trying to represent
> two distinct hardware blocks. What am I missing?
> 
> Anyway, I took a swing at fixing this while preserving the ordering of
> the important bits. The changes are fairly trivial/straightforward and
> not meant to be final code, but can you test this out please?

the patch seems to work, after fixing a few compilation issues. See
bellow. Thanks!

I think the probe order is reversed, but HDMI works in my case, so
I guess that doesn't matter in the end. Or at least it didn't in the
short test I made.

kind regards,
	o.


>From 0eac644368711f52fffa4246aefc546591cef090 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous at megous.com>
Date: Wed, 19 May 2021 23:44:45 +0200
Subject: [PATCH] fix compilation issues

---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index c44ed22d8aef0..947b4231f6449 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -5,6 +5,7 @@
 
 #include <linux/delay.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 
 #include "sun8i_dw_hdmi.h"
 
@@ -748,7 +749,7 @@ int sun8i_hdmi_phy_probe(struct platform_device *pdev)
 	return ret;
 }
 
-void sun8i_hdmi_phy_remove(struct platform_device *pdev)
+int sun8i_hdmi_phy_remove(struct platform_device *pdev)
 {
 	struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev);
 
-- 
2.31.1


[    0.307254] platform 1c28000.serial: probe deferral - supplier 1c20800.pinctrl not ready
[    0.307340] platform 1c28400.serial: probe deferral - supplier 1c20800.pinctrl not ready
[    0.307379] platform 1c28c00.serial: probe deferral - supplier 1c20800.pinctrl not ready
[    0.309235] fwnode_links_purge_suppliers: display-engine
[    0.310176] platform 1c0c000.lcd-controller: probe deferral - wait for supplier mixer at 200000
[    0.310228] platform 1c0d000.lcd-controller: probe deferral - wait for supplier mixer at 200000
[    0.311902] platform 1ca0000.dsi: probe deferral - wait for supplier pmic at 3a3
[    0.312287] platform 1ee0000.hdmi: probe deferral - wait for supplier pmic at 3a3
[    0.313076] fwnode_links_purge_suppliers: hdmi-phy at 1ef0000    <------ phy probed
[    0.316766] platform 1c21800.lradc: probe deferral - wait for supplier pmic at 3a3
[    0.317258] platform vibrator: probe deferral - wait for supplier pmic at 3a3
[    0.318703] sun6i-rtc 1f00000.rtc: registered as rtc0
[    0.318748] sun6i-rtc 1f00000.rtc: setting system clock to 2021-05-19T21:40:59 UTC (1621460459)
[    0.318917] sun6i-rtc 1f00000.rtc: RTC enabled
[    0.318938] fwnode_links_purge_suppliers: rtc at 1f00000
[    0.318960] fwnode_links_purge_consumers: reboot-mode at 4
[    0.319185] i2c /dev entries driver

....

[    0.453301] fwnode_links_purge_consumers: port
[    0.453323] fwnode_links_purge_consumers: endpoint
[    0.453346] fwnode_links_purge_consumers: panel at 0
[    0.491868] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffffffc010a44230)
[    0.501830] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffffffc010a44230)
[    0.502915] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    0.502956] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffffffc010a415a0)
[    0.503466] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffffffc010a415a0)
[    0.503545] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffffffc010a431c8)
[    0.505330] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    0.507566] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    0.510717] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffffffc010a43568)
[    0.514674] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    0.514932] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    0.515160] fwnode_links_purge_suppliers: hdmi at 1ee0000           <------ hdmi probed
[    0.515195] fwnode_links_purge_consumers: ports
[    0.515217] fwnode_links_purge_consumers: port at 0
[    0.515240] fwnode_links_purge_consumers: endpoint
[    0.515264] fwnode_links_purge_consumers: port at 1
[    0.515343] fwnode_links_purge_consumers: endpoint
[    0.517089] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input1
[    0.517358] fwnode_links_purge_suppliers: lradc at 1c21800
[    0.517384] fwnode_links_purge_consumers: button-200
[    0.517407] fwnode_links_purge_consumers: button-400
[    0.518414] input: gpio-vibrator as /devices/platform/vibrator/input/input2
[    0.518582] fwnode_links_purge_suppliers: vibrator



> -Saravana



More information about the linux-arm-kernel mailing list