[PATCH 2/4] arm64: dts: broadcom: normalize the node name of the UART devices

[Zhen Lei]

Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".

Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
---
 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2ffb2c92182a..7b04dfe67bef 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -470,7 +470,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart at 100000 {
+		uart0: serial at 100000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00100000 0x1000>;
@@ -481,7 +481,7 @@
 			status = "disabled";
 		};
 
-		uart1: uart at 110000 {
+		uart1: serial at 110000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00110000 0x1000>;
@@ -492,7 +492,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart at 120000 {
+		uart2: serial at 120000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00120000 0x1000>;
@@ -503,7 +503,7 @@
 			status = "disabled";
 		};
 
-		uart3: uart at 130000 {
+		uart3: serial at 130000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00130000 0x1000>;
-- 
2.21.1