[PATCH v1 7/9] spi: pxa2xx: Fix style of and typos in the comments and messages
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Mon May 17 07:03:49 PDT 2021
Fix style of the comments and messages along with typos in them.
While at it, update Intel Copyright year.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/spi/spi-pxa2xx-dma.c | 4 +-
drivers/spi/spi-pxa2xx-pci.c | 5 ++-
drivers/spi/spi-pxa2xx.c | 71 ++++++++++++++++++----------------
drivers/spi/spi-pxa2xx.h | 2 +-
include/linux/pxa2xx_ssp.h | 9 +++--
include/linux/spi/pxa2xx_spi.h | 12 ++++--
6 files changed, 58 insertions(+), 45 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index f022d82dcb1b..be563f0dd03a 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -2,7 +2,7 @@
/*
* PXA2xx SPI DMA engine support.
*
- * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2013, 2021 Intel Corporation
* Author: Mika Westerberg <mika.westerberg at linux.intel.com>
*/
@@ -26,7 +26,7 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
* It is possible that one CPU is handling ROR interrupt and other
* just gets DMA completion. Calling pump_transfers() twice for the
* same transfer leads to problems thus we prevent concurrent calls
- * by using ->dma_running.
+ * by using dma_running.
*/
if (atomic_dec_and_test(&drv_data->dma_running)) {
/*
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index dce9ade9a4df..9c9992d4f547 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * CE4100's SPI device is more or less the same one as found on PXA
+ * PCI glue driver for SPI PXA2xx compatible controllers.
+ * CE4100's SPI device is more or less the same one as found on PXA.
*
- * Copyright (C) 2016, Intel Corporation
+ * Copyright (C) 2016, 2021 Intel Corporation
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f8264771b360..94b1585de203 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2013, 2021 Intel Corporation
*/
#include <linux/acpi.h>
@@ -40,11 +40,11 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define TIMOUT_DFLT 1000
/*
- * for testing SSCR1 changes that require SSP restart, basically
- * everything except the service and interrupt enables, the pxa270 developer
+ * For testing SSCR1 changes that require SSP restart, basically
+ * everything except the service and interrupt enables, the PXA270 developer
* manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
- * list, but the PXA255 dev man says all bits without really meaning the
- * service and interrupt enables
+ * list, but the PXA255 developer manual says all bits without really meaning
+ * the service and interrupt enables.
*/
#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
| SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
@@ -653,12 +653,12 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
irq_status &= ~SSSR_TFS;
if (irq_status & SSSR_ROR) {
- int_error_stop(drv_data, "interrupt_transfer: fifo overrun", -EIO);
+ int_error_stop(drv_data, "interrupt_transfer: FIFO overrun", -EIO);
return IRQ_HANDLED;
}
if (irq_status & SSSR_TUR) {
- int_error_stop(drv_data, "interrupt_transfer: fifo underrun", -EIO);
+ int_error_stop(drv_data, "interrupt_transfer: FIFO underrun", -EIO);
return IRQ_HANDLED;
}
@@ -670,7 +670,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
}
}
- /* Drain rx fifo, Fill tx fifo and prevent overruns */
+ /* Drain Rx FIFO, Fill Tx FIFO and prevent overruns */
do {
if (drv_data->read(drv_data)) {
int_transfer_complete(drv_data);
@@ -691,8 +691,8 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
sccr1_reg &= ~SSCR1_TIE;
/*
- * PXA25x_SSP has no timeout, set up rx threshould for the
- * remaining RX bytes.
+ * PXA25x_SSP has no timeout, set up Rx threshold for
+ * the remaining Rx bytes.
*/
if (pxa25x_ssp_comp(drv_data)) {
u32 rx_thre;
@@ -914,7 +914,7 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
/*
* Calculate the divisor for the SCR (Serial Clock Rate), avoiding
- * that the SSP transmission rate can be greater than the device rate
+ * that the SSP transmission rate can be greater than the device rate.
*/
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
@@ -972,7 +972,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
/* Check if we can DMA this transfer */
if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
- /* reject already-mapped transfers; PIO won't always work */
+ /* Reject already-mapped transfers; PIO won't always work */
if (message->is_dma_mapped
|| transfer->rx_dma || transfer->tx_dma) {
dev_err(&spi->dev,
@@ -981,7 +981,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
return -EINVAL;
}
- /* warn ... we force this to PIO mode */
+ /* Warn ... we force this to PIO mode */
dev_warn_ratelimited(&spi->dev,
"DMA disabled for transfer length %u greater than %d\n",
transfer->len, MAX_DMA_LEN);
@@ -1026,8 +1026,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
u32_writer : null_writer;
}
/*
- * if bits/word is changed in dma mode, then must check the
- * thresholds and burst also
+ * If bits per word is changed in DMA mode, then must check
+ * the thresholds and burst also.
*/
if (chip->enable_dma) {
if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
@@ -1101,10 +1101,10 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
- /* first set CR1 without interrupt and service enables */
+ /* First set CR1 without interrupt and service enables */
pxa2xx_spi_update(drv_data, SSCR1, change_mask, cr1);
- /* see if we need to reload the config registers */
+ /* See if we need to reload the configuration registers */
pxa2xx_spi_update(drv_data, SSCR0, GENMASK(31, 0), cr0);
/* Restart the SSP */
@@ -1114,7 +1114,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
u8 tx_level = read_SSSR_bits(drv_data, SSSR_TFL_MASK) >> 8;
if (tx_level) {
- /* On MMP2, flipping SSE doesn't to empty TXFIFO. */
+ /* On MMP2, flipping SSE doesn't to empty Tx FIFO. */
dev_warn(&spi->dev, "%u bytes of garbage in Tx FIFO!\n", tx_level);
if (tx_level > transfer->len)
tx_level = transfer->len;
@@ -1134,7 +1134,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
/*
* Release the data by enabling service requests and interrupts,
- * without changing any mode bits
+ * without changing any mode bits.
*/
pxa2xx_spi_write(drv_data, SSCR1, cr1);
@@ -1207,12 +1207,13 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
if (drv_data->ssp_type == CE4100_SSP)
return 0;
- /* NOTE: setup() can be called multiple times, possibly with
- * different chip_info, release previously requested GPIO
+ /*
+ * NOTE: setup() can be called multiple times, possibly with
+ * different chip_info, release previously requested GPIO.
*/
cleanup_cs(spi);
- /* If (*cs_control) is provided, ignore GPIO chip select */
+ /* If ->cs_control() is provided, ignore GPIO chip select */
if (chip_info->cs_control) {
chip->cs_control = chip_info->cs_control;
return 0;
@@ -1288,7 +1289,7 @@ static int setup(struct spi_device *spi)
break;
}
- /* Only alloc on first setup */
+ /* Only allocate on the first setup */
chip = spi_get_ctldata(spi);
if (!chip) {
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
@@ -1307,8 +1308,10 @@ static int setup(struct spi_device *spi)
chip->timeout = TIMOUT_DFLT;
}
- /* protocol drivers may change the chip settings, so...
- * if chip_info exists, use it */
+ /*
+ * Protocol drivers may change the chip settings, so...
+ * if chip_info exists, use it.
+ */
chip_info = spi->controller_data;
/* chip_info isn't always needed */
@@ -1344,11 +1347,13 @@ static int setup(struct spi_device *spi)
chip->lpss_tx_threshold = tx_thres;
}
- /* set dma burst and threshold outside of chip_info path so that if
- * chip_info goes away after setting chip->enable_dma, the
- * burst and threshold can still respond to changes in bits_per_word */
+ /*
+ * Set DMA burst and threshold outside of chip_info path so that if
+ * chip_info goes away after setting chip->enable_dma, the burst and
+ * threshold can still respond to changes in bits_per_word.
+ */
if (chip->enable_dma) {
- /* set up legal burst and threshold for dma */
+ /* Set up legal burst and threshold for DMA */
if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi,
spi->bits_per_word,
&chip->dma_burst_size,
@@ -1677,7 +1682,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
ssp = &platform_info->ssp;
if (!ssp->mmio_base) {
- dev_err(&pdev->dev, "failed to get ssp\n");
+ dev_err(&pdev->dev, "failed to get SSP\n");
return -ENODEV;
}
@@ -1699,7 +1704,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
controller->dev.of_node = dev->of_node;
controller->dev.fwnode = dev->fwnode;
- /* the spi->mode bits understood by this driver: */
+ /* The spi->mode bits understood by this driver: */
controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
controller->bus_num = ssp->port_id;
@@ -1787,7 +1792,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT);
pxa2xx_spi_write(drv_data, SSCR1, tmp);
- /* using the Motorola SPI protocol and use 8 bit frame */
+ /* Using the Motorola SPI protocol and use 8 bit frame */
tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8);
pxa2xx_spi_write(drv_data, SSCR0, tmp);
break;
@@ -1859,7 +1864,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, drv_data);
status = spi_register_controller(controller);
if (status) {
- dev_err(&pdev->dev, "problem registering spi controller\n");
+ dev_err(&pdev->dev, "problem registering SPI controller\n");
goto out_error_pm_runtime_enabled;
}
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index db9de46110ad..9a20fb88e50f 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2013, 2021 Intel Corporation
*/
#ifndef SPI_PXA2XX_H
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2b21bc1f3c73..a3fec2de512f 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (C) 2003 Russell King, All Rights Reserved.
+ * Copyright (C) 2003 Russell King, All Rights Reserved.
*
* This driver supports the following PXA CPU/SSP ports:-
*
@@ -59,7 +59,7 @@ struct device_node;
/* PXA27x, PXA3xx */
#define SSCR0_EDSS BIT(20) /* Extended data size select */
#define SSCR0_NCS BIT(21) /* Network clock select */
-#define SSCR0_RIM BIT(22) /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_RIM BIT(22) /* Receive FIFO overrun interrupt mask */
#define SSCR0_TUM BIT(23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC GENMASK(26, 24) /* Frame rate divider control (mask) */
#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
@@ -126,7 +126,7 @@ struct device_node;
#define QUARK_X1000_SSCR1_EFWR BIT(16) /* Enable FIFO Write/Read */
#define QUARK_X1000_SSCR1_STRF BIT(17) /* Select FIFO or EFWR */
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+/* Extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
@@ -222,7 +222,8 @@ enum pxa_ssp_type {
CE4100_SSP,
MRFLD_SSP,
QUARK_X1000_SSP,
- LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
+ /* Keep LPSS types sorted with lpss_platforms[] */
+ LPSS_LPT_SSP,
LPSS_BYT_SSP,
LPSS_BSW_SSP,
LPSS_SPT_SSP,
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index 12ef04d0896d..eaab121ee575 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -14,7 +14,10 @@
struct dma_chan;
-/* device.platform_data for SSP controller devices */
+/*
+ * The platform data for SSP controller devices
+ * (resides in device.platform_data).
+ */
struct pxa2xx_spi_controller {
u16 num_chipselect;
u8 enable_dma;
@@ -30,8 +33,11 @@ struct pxa2xx_spi_controller {
struct ssp_device ssp;
};
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
+/*
+ * The controller specific data for SPI slave devices
+ * (resides in spi_board_info.controller_data),
+ * copied to spi_device.platform_data ... mostly for
+ * DMA tuning.
*/
struct pxa2xx_spi_chip {
u8 tx_threshold;
--
2.30.2
More information about the linux-arm-kernel
mailing list