[PATCH 3/9] arm64: dts: rockchip: Prepare Rockchip RK1808
Johan Jonker
jbx6244 at gmail.com
Sun May 16 18:29:33 PDT 2021
Hi Andreas,
Send the complete serie to all maintainers and mail lists.
===
Heiko's sort rules:
compatible
reg
interrupts
[alphabetical]
status [if needed]
===
My incomplete list:
For nodes:
If exists on top: model, compatible and chosen.
Sort things without reg alphabetical first,
then sort the rest by reg address.
Inside nodes:
If exists on top: compatible, reg and interrupts.
In alphabetical order the required properties.
Then in alphabetical order the other properties.
And as last things that start with '#' in alphabetical order.
Add status below all other properties for soc internal components with
any board-specifics.
Keep an empty line between properties and nodes.
Exceptions:
Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names
and dma-names.
Sort simple-audio-card,name above other simple-audio-card properties.
Sort regulator-name above other regulator properties.
Sort regulator-min-microvolt above regulator-max-microvolt.
===
Fix complete dtsi for property sort order!
Add more drivers. (cru, pinctrl)
Johan
On 5/17/21 1:05 AM, Andreas Färber wrote:
> Add an initial Device Tree for Rockchip RK1808 SoC.
> Based on shipping TB-RK1808M0 DTB.
>
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
> arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++
> 1 file changed, 203 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi
> new file mode 100644
> index 000000000000..af2b51afda7d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2021 Andreas Färber
> + */
> +
#include <dt-bindings/clock/rk1808-cru.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + compatible = "rockchip,rk1808";
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
64 bit ??
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + serial4 = &uart4;
> + serial5 = &uart5;
> + serial6 = &uart6;
> + serial7 = &uart7;
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP>;
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP>;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + CPU_SLEEP: cpu-sleep {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x10000>;
> + entry-latency-us = <120>;
> + exit-latency-us = <250>;
> + min-residency-us = <900>;
> + };
> + };
> + };
> +
> + arm-pmu {
sort node names
> + compatible = "arm,cortex-a35-pmu";
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + arm,no-tick-in-suspend;
> + };
> +
> + xin24m: xin24m {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + #clock-cells = <0>;
> + clock-output-names = "xin24m";
> + };
> +
> + firmware {
sort node names
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + tee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
Remove, use 64bit reg.
See:
https://github.com/rockchip-linux/kernel/blob/develop-4.19/arch/arm64/boot/dts/rockchip/rk1808.dtsi
> +
> + system_sram: sram at fec00000 {
> + compatible = "mmio-sram";
> + reg = <0xfec00000 0x200000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xfec00000 0x200000>;
> + };
> +
> + gic: interrupt-controller at ff100000 {
> + compatible = "arm,gic-v3";
> + reg = <0xff100000 0x10000>, /* GICD */
> + <0xff140000 0xc0000>, /* GICR */
> + <0xff300000 0x10000>, /* GICC */
> + <0xff310000 0x10000>, /* GICH */
> + <0xff320000 0x10000>; /* GICV */
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gic_its: msi-controller at ff120000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0xff120000 0x20000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + uart0: serial at ff430000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff430000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
>From manufacturer tree:
uart0: serial at ff430000 {
compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
reg = <0x0 0xff430000 0x0 0x100>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART0_PMU>, <&cru PCLK_UART0_PMU>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 0>, <&dmac 1>;
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
pinctrl-names = "default";
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
Sort all uart nodes.
Does this work without SCLK_UART0_PMU, PCLK_UART0_PMU and pinctrl??
Add clk-rk1808.c rk1808-cru.h
In mainline pinctrl and gpio are WIP and split elsewhere now.
pinctrl: rockchip: add support for rk1808 SoCs
https://github.com/rockchip-linux/kernel/commit/b2828bc4417c9669fdaca3b8ef392f41850c86e7
> +
> + uart1: serial at ff540000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff540000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart2: serial at ff550000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff550000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart3: serial at ff560000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff560000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart4: serial at ff570000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff570000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart5: serial at ff5a0000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff5a0000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart6: serial at ff5b0000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff5b0000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + uart7: serial at ff5c0000 {
> + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart";
> + reg = <0xff5c0000 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> +};
>
More information about the linux-arm-kernel
mailing list