[PATCH 2/2] arm64: apple: Add PCIe node

[Mark Kettenis]

From: Mark Kettenis <kettenis at openbsd.org>

Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).

Clock references and DART (IOMMU) references are left out at the
moment and will be added once the appropriate bindings have been
settled upon.

Signed-off-by: Mark Kettenis <kettenis at openbsd.org>
---
 arch/arm64/boot/dts/apple/t8103.dtsi | 64 ++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 503a76fc30e6..102947935d63 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -214,5 +214,69 @@ pinctrl_smc: pinctrl at 23e820000 {
 				     <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		pcie0: pcie at 690000000 {
+			compatible = "apple,t8103-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x4000>,
+			      <0x6 0x8c000000 0x0 0x4000>,
+			      <0x6 0x81000000 0x0 0x8000>,
+			      <0x6 0x82000000 0x0 0x8000>,
+			      <0x6 0x83000000 0x0 0x8000>;
+			reg-names = "ecam", "rc", "phy", "port0", "port1", "port2";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <704 32>;
+
+			bus-range = <0 7>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			pci at 0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 152 0>;
+				max-link-speed = <2>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+
+			pci at 1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 153 0>;
+				max-link-speed = <2>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+
+			pci at 2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 33 0>;
+				max-link-speed = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
 	};
 };
-- 
2.31.1