[PATCH] arm64: dts: ti: k3-am65-iot2050-common: Disable mailbox nodes

[Suman Anna]

There are no sub-mailbox devices defined currently for both the
IOT2050 boards. These are usually dictated by the firmwares running
on the R5F remote processors and the applications they provide.
Defining the actual sub-mailboxes will also dictate the interrupts
the clusters will use for interrupts on the Cortex-A53 cores.

Disable all of the Mailbox clusters until the sub-mailboxes are
defined and used. This fixes the warnings around the missing
interrupts with the upcoming conversion of the OMAP Mailbox binding
to YAML format.

Signed-off-by: Suman Anna <s-anna at ti.com>
---
Hi Nishanth,

I will be posting the conversion of the OMAP Mailbox binding to YAML
sometime next week to deal with the current dtbs_check warnings seen
with these nodes on all K3 SoCs. It is kinda of a chicken and egg
problem w.r.t when you want all warnings gone, and this is in
preparation towards that. It also follows anyway the expected style
for Mailbox unless you add the usable mailbox sub-device nodes and
the interrupts they use.

regards
Suman

 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index de763ca9251c..f4ec9ed52939 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -653,3 +653,51 @@ &pcie1_rc {
 &pcie1_ep {
 	status = "disabled";
 };
+
+&mailbox0_cluster0 {
+	status = "disabled";
+};
+
+&mailbox0_cluster1 {
+	status = "disabled";
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
-- 
2.30.1