[PATCH v3 0/3] arm64: meson-sm1: add support for Banana PI BPI-M5

Neil Armstrong narmstrong at baylibre.com
Fri May 14 07:32:52 PDT 2021


Banana Pi BPI-M5 is a credit card format SBC with the following features:
- Amlogic S905X3 quad core Cortex-A55
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
- 2x LEDS
- SDCard
- 2.5mm Jack with Stereo Audio + CVBS
- Infrared Received
- ADC Button
- GPIO Button
- 40 pins header + 3pins debug header

This also adds the missing toacodec node to enable internal audio codec.

Changes since v2 at [2]:
- small nit fix in DT comment

Changes since v1 at [1]:
- fixed bad compatible for sm1 toacodec node
- removed tab in bindings (but kept martin's review tag)
- renamed adc key node
- renamed flash_1v8 regulator to match schematics
- fixed vddcpu regulator voltages
- fixed ethmac rgmii-txid and checked it still worked
- added missing GPIO lines names (thanks martin !)

[1] https://lore.kernel.org/r/20210429170404.3616111-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20210505073248.3816183-1-narmstrong@baylibre.com

Neil Armstrong (3):
  arm64: dts: meson-sm1: add toacodec node
  dt-bindings: arm: amlogic: add Banana PI M5 bindings
  arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-sm1-bananapi-m5.dts     | 646 ++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  10 +
 4 files changed, 658 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts

-- 
2.25.1




More information about the linux-arm-kernel mailing list