[PATCH 3/4] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts

[Tobias Schramm]

The Allwinner V3s and V3 SoCs feature an integrated analog audio codec.
Additionally both have an analog frontend with mixers and amplifiers for
the codec.
The analog frontend is identical to that on the Allwinner H3 SoC.
This commit adds both, the analog codec and its frontend to the V3s dtsi.

Signed-off-by: Tobias Schramm <t.schramm at manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 3eaa8703e2ac..7abc51c79f62 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -441,6 +441,25 @@ lradc: lradc at 1c22800 {
 			status = "disabled";
 		};
 
+		codec: codec at 1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog at 1c23000 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
 		uart0: serial at 1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-- 
2.30.1