[PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
Marcin Wojtas
mw at semihalf.com
Thu May 13 10:54:15 PDT 2021
Hi Vladimir,
czw., 13 maj 2021 o 16:19 Vladimir Oltean <vladimir.oltean at nxp.com> napisał(a):
>
> On Thu, May 13, 2021 at 10:12:15AM +0800, Shawn Guo wrote:
> > On Tue, May 11, 2021 at 09:48:22AM +0000, Claudiu Manoil wrote:
> > > >-----Original Message-----
> > > >From: Shawn Guo <shawnguo at kernel.org>
> > > >Sent: Tuesday, May 11, 2021 6:07 AM
> > > [...]
> > > >Subject: Re: [PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window
> > > >ranges
> > > >
> > > >+ Claudiu
> > > >
> > > >On Wed, Apr 07, 2021 at 02:34:38PM +0200, Kornel Duleba wrote:
> > > >> Currently all PCIE windows point to bus address 0x0, which does not match
> > > >> the values obtained from hardware during EA.
> > > >> Replace those values with CPU addresses, since in reality we
> > > >> have a 1:1 mapping between the two.
> > > >>
> > > >> Signed-off-by: Kornel Duleba <mindal at semihalf.com>
> > > >
> > > >Claudiu,
> > > >
> > > >Do you have any comment on this?
> > > >
> > >
> > > Well, probing is still working with this change, I've just tested it.
> > >
> > > PCI listing at boot time changes from:
> > >
> > > pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
> > > pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
> > > pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
> > >
> > > to:
> > >
> > > pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
> > > pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000
> > > pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000
> > >
> > > and looks reasonable.
> > > Adding Vladimir and Alex just in case.
> > >
> > > Acked-by: Claudiu Manoil <claudiu.manoil at nxp.com>
> >
> > Thanks, Claudiu.
> >
> > Kornel,
> >
> > Do we need a Fixes tag for this patch?
> >
> > Shawn
>
> Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
>
> I am not sure whether "incorrect data that is unused" deserves a Fixes:
> tag or not, probably not.
>
> Bjorn Helgaas did point out before that "The fact that all these windows
> map to PCI bus address 0 looks broken", so there's that:
>
> https://patchwork.kernel.org/project/linux-pci/cover/20201129230743.3006978-1-kw@linux.com/
>
> And while it does look "broken", with the Enhanced Allocation capability
> and the pci-host-ecam-generic driver, there is no address translation
> taking place, so no inbound/outbound windows are configured, so the
> range.pci_addr calculated in devm_of_pci_get_host_bridge_resources() is
> not used for anything except for printing.
...in Linux. Please note Linux device trees can be used as-is by other
projects. Regardless my opinion on how that's unfortunate, FreeBSD
does additional ranges check before performing EA and fails. Since the
current DT description is imo broken and the change is transparent for
Linux, it would be great to get this change merged into tree in case
there are are no objections.
Thanks,
Marcin
>
> FWIW here's a more complete image of what changes with Kornel's patch
> ("-" is before, "+" is after) - again all is limited to the dmesg output.
>
> pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
> pci-host-generic 1f0000000.pcie: Parsing ranges property...
> -pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f8000000 end 0x01f815ffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f8000000
> -pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f8000000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f8160000 end 0x01f81cffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f8160000
> -pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f8160000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x01f81d0000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f81d0000 end 0x01f81effff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f81d0000
> -pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f81d0000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x01f81f0000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f81f0000 end 0x01f820ffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f81f0000
> -pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f81f0000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x01f8210000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f8210000 end 0x01f822ffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f8210000
> -pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f8210000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x01f8230000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01f8230000 end 0x01f824ffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01f8230000
> -pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x0000000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01f8230000 => offset 0x0000000000
> +pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x01fc000000
> pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: tmp_res start 0x01fc000000 end 0x01fc3fffff
> -pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x0000000000 => offset 0x01fc000000
> +pci-host-generic 1f0000000.pcie: devm_of_pci_get_host_bridge_resources: pci_addr 0x01fc000000 => offset 0x0000000000
> pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00]
> pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00]
> -pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff])
> -pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff])
> +pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff]
> +pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref]
> +pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff]
> +pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref]
> +pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff]
> +pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref]
> +pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff]
> pci 0000:00:00.0: [1957:e100] type 00 class 0x020001
> pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0)
> pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
>
> My understanding might be wrong, but it should be possible for the PCIe
> host bridge driver to initialize some of its resources by enumerating
> the functions which have the EA capability, and not require the device
> tree writer to add a "ranges" entry for them at all. Then this discussion
> would be moot - that resource would have no way to be incorrect.
>
> $ lspci -vvv
> 0000:00:00.0 Ethernet controller: Freescale Semiconductor Inc Device e100 (rev 01) (prog-if 01)
> Subsystem: Freescale Semiconductor Inc Device e100
> (...)
> Capabilities: [9c] Enhanced Allocation (EA): NumEntries=4
> Entry 0: Enable+ Writable- EntrySize=3
> BAR Equivalent Indicator: BAR 0
> PrimaryProperties: memory space, non-prefetchable
> SecondaryProperties: entry unavailable for use, PrimaryProperties should be used
> Base: 1f8000000
> MaxOffset: 0003ffff
> Entry 1: Enable+ Writable- EntrySize=3
> BAR Equivalent Indicator: BAR 2
> PrimaryProperties: memory space, prefetchable
> SecondaryProperties: memory space, non-prefetchable
> Base: 1f8160000
> MaxOffset: 0000ffff
> Entry 2: Enable+ Writable- EntrySize=3
> BAR Equivalent Indicator: VF-BAR 0
> PrimaryProperties: VF memory space, non-prefetchable
> SecondaryProperties: entry unavailable for use, PrimaryProperties should be used
> Base: 1f81d0000
> MaxOffset: 0000ffff
> Entry 3: Enable+ Writable- EntrySize=3
> BAR Equivalent Indicator: VF-BAR 2
> PrimaryProperties: VF memory space, prefetchable
> SecondaryProperties: VF memory space, prefetchable
> Base: 1f81f0000
> MaxOffset: 0000ffff
>
> This information, which is already present in the hardware, needs to be
> duplicated here (now I do see that the 'ranges' property declares them
> larger than they really are, too):
>
> /* PF0-6 BAR0 - non-prefetchable memory */
> ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000
> /* PF0-6 BAR2 - prefetchable memory */
> 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000
> /* PF0: VF0-1 BAR0 - non-prefetchable memory */
> 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000
> /* PF0: VF0-1 BAR2 - prefetchable memory */
> 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000
More information about the linux-arm-kernel
mailing list