[PATCH 4/4] arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"
Kishon Vijay Abraham I
kishon at ti.com
Wed May 12 08:12:09 PDT 2021
Commit 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed
support for USB0") added PHY DT nodes with node name as "link"
However nodes with #phy-cells should be named 'phy' as discussed in [1].
Re-name subnodes of serdes in J721E to 'phy'.
[1] -> http://lore.kernel.org/r/20200909203631.GA3026331@bogus
Fixes: 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances")
Fixes: 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0")
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 1b25a5ae9635..ffccbc53f1e7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -359,7 +359,7 @@
};
&serdes3 {
- serdes3_usb_link: link at 0 {
+ serdes3_usb_link: phy at 0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
@@ -674,7 +674,7 @@
assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz0_pll1_refclk>;
- serdes0_pcie_link: link at 0 {
+ serdes0_pcie_link: phy at 0 {
reg = <0>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
@@ -687,7 +687,7 @@
assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz1_pll1_refclk>;
- serdes1_pcie_link: link at 0 {
+ serdes1_pcie_link: phy at 0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
@@ -700,7 +700,7 @@
assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
assigned-clock-parents = <&wiz2_pll1_refclk>;
- serdes2_pcie_link: link at 0 {
+ serdes2_pcie_link: phy at 0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
--
2.17.1
More information about the linux-arm-kernel
mailing list